ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: kubik1981 on August 27, 2009, 05:22:25 PM
-
i found this while looking through my local craigslist listings
http://saginaw.craigslist.org/ctd/1345506855.html
-
I'll see your craigslist and counter!
(http://www.degraeve.de/general/sj6_3.jpg)
-
the things people will do to these little trucks
-
thats some funny s***
-
that is so cool....I'd love to have one of those. I'm taking some measurements of my 413K and trying to get the plans to make a camper for the truck. It's not going to roomy but I'm sure I can make it to fit me and the GF.
-
lol, I have seen a 2 door sunrunner witha plow on it. No pic but i think that was all the guy used it for so it must work well.
-
A sunrunner with a snowplow - isn't that ironic?
-
This is my 1985 413K and when I got it we were sure that it wouldn't push much snow. I only had trouble with one storm due to very wet snow.
It's got a 7' fisher hydranlic plow with a plastic scrapper edge. The plastic really reduces the weight of the plow.
I learnt really quick to stop when the plow starts to lift over the snow. Back up and then hit it again. I plowed all winter and it was a blast....I alsmot rolled it one night when I was backing up and missed a snow bank....it almost sent me over.
One thing bad is trying to drive it with big boots and a big jacket....shifting, plow lever, armstrong steering and it didn't like to idle.....on top of that trying to drink a pepsi.
(http://i22.photobucket.com/albums/b305/Saddlebrook/snowstorm005.jpg)
(http://i22.photobucket.com/albums/b305/Saddlebrook/snowstorm007.jpg)
-
Pickup edition!
The bed on the back of those look cool enough I wish I could fit in one. :)
-
the truck looks good but it really looks like the guy who designed it was stoned when he drew out the box. IT looks was to high to match the truck.
I'm working on making the bed removable. The stock bed will have a dump and I'll have some different beds. One bed to haul camping gear with some cabinets and gear holders. THe final bed is actually going to be a small light weight camper.
I've got a rooftop tent but I need more storege room so I'm going to build a small box camper and incorporate the tent on the top. Steel bottom to support the whole thing, the side out of aluminum and on top the roof will hinge and make room to sleep up there. It's a work in progress and since I just had to shut down my business due to loss of my building I'll have all winter. pics to come.