ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: shackwrrr on August 29, 2009, 01:49:33 PM

Title: rear upper control arm
Post by: shackwrrr on August 29, 2009, 01:49:33 PM: I did a 2 in spacer lift in the rear of my 4 door kick today and I dont like the angle of the balljoint on the upper control arm. Are there any aftermarket ones like the calimini vbar? with a heim? I dont really want just a spacer since its preatty rusty already
Title: Re: rear upper control arm
Post by: bentparts on August 29, 2009, 03:20:43 PM: I don't think there are any available outside the kits from Calmini and ZOR.
Title: Re: rear upper control arm
Post by: shackwrrr on August 29, 2009, 08:44:33 PM: hm Guess Ill make my own
Title: Re: rear upper control arm
Post by: shackwrrr on August 29, 2009, 09:04:47 PM: well Who makes the spacers i guess I can get one and make it work for a while
Title: Re: rear upper control arm
Post by: bentparts on August 30, 2009, 05:17:11 AM: Mudchild if your in Canada, ZOR if your US.
Title: Re: rear upper control arm
Post by: idaholwb on August 30, 2009, 05:37:39 PM: Zukination in Canada makes a really nice rear control arm setup for like $500 for all 3 rear arms with Johnny Joint style joints... And they are all adjustable...
Title: Re: rear upper control arm
Post by: Armour on August 30, 2009, 07:16:52 PM: Just fab your own. I just cut the ball joint end off mine and welded on a plate and nut and screwed on a heim! gives me some adjustment.
Title: Re: rear upper control arm
Post by: jeff1997 on September 01, 2009, 03:09:49 PM: I make a 2" spacer that the bolts go all the way through. It will run you $40 to the US or $50 to Canada.