ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: xkmail on September 30, 2009, 01:42:30 PM
-
I ordered some motor mounts off ebay and they seem bigger than the ones I had on the stock motor. I am unsure if maybe someone put on a wrong motor mount in the past. The ones I got are larger and have a little "ear" on one end, the stockers had no ear and were not as big.
Are they interchangeable?
-
i would think that as long as they are not thicker they would work. but not sure on that. only thing i can say is try it and see if you run into any problems with the new ones. if not then i would use them.
-
stock 1.9" thick, new 2.4"
however the bolt holes and line up pegs seem to be spot on
k
-
funny thing I just noticed.
the ebay seller has motor mounts for:
1989-1990 geo tracker and
1989-1990 suzuki sidekick.
I have a geo tracker but the lsiting for sidekick looks like my oem, the listing for tracker looks different, maybe the LSI or 4 door uses different mounts?
-
dont know that one. u would think they would all be the same since its the same motor. but i guess they wanted to have them different for some reason. might want to contact the seller and tell him they are the wrong ones and see if he can exchange them
-
also mine look like your old ones too. i have a 95 tracker with the 1.6l
-
Anyone know what the difference is between the mounts on a 1.8L and 2.0L compared to the 1.6?