ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: ar15tac on November 09, 2009, 08:32:34 PM

Title: noob question... do i have a 16v or 8v
Post by: ar15tac on November 09, 2009, 08:32:34 PM

It's a 1995 tracker 2 door with a manual tanny with 4wheel drive.  If i need to look at it to tell the difference what differences can you see.  I'm new to these zuki motors  I'm used to my 351w in my 66 stang.

Title: Re: noob question... do i have a 16v or 8v
Post by: ToyYoda on November 09, 2009, 08:48:21 PM

If you have a alum. valve cover it's a 16v.

Title: Re: noob question... do i have a 16v or 8v
Post by: locjaw on November 10, 2009, 07:48:13 AM

1995 and newer only had the 16v

Title: Re: noob question... do i have a 16v or 8v
Post by: captchee on November 10, 2009, 05:19:54 PM

 i the plugs go through the valve cover like the  photo posted above , then its a 16valve  1.6.
 if the  plugs go in above the exshaust manifold   and not through the  valve cover , then its a *valve 1.6

Title: Re: noob question... do i have a 16v or 8v
Post by: ar15tac on November 11, 2009, 09:52:39 AM

Great thank you guys very much then i have a 16 valve:)

Title: Re: noob question... do i have a 16v or 8v
Post by: Skyhiranger on November 18, 2009, 10:20:55 AM

Quote from: locjaw on November 10, 2009, 07:48:13 AM

1995 and newer only had the 16v

Umm, no.  The 95 2wd 2 doors still had the 8V.