ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: ZukiChick2 on November 11, 2009, 08:01:55 PM
-
My 2000 Suzuki Grand Vitara was a hit n run victim >:(on Friday. We located a 2001 door at the junk yard. ;) OOPS, the wire harness plugs are different! :P I am desperate; the owners manual is of no help and no one in Spokane that I know has a Suzuki shop manual. The mechanic doing the work is a jeep guy and is bashing suzuki's so I wanna get this done!
-
Which door are we talking about?
Do the wire colors match up?
Can you salvage the harness from the original door?
There's not that much wiring in the doors - unless it's the driver's side door AND you have power everything - it shouldn't be that hard to figure out.
I took a quick look at the two diagrams - power mirrors, power locks, power windows - the wires appear to be the same color for both years, makes it a matter of either cutting & splicing or swapping the connector bodies across - assuming that they use similar pins.
As for location - there will either be a connector inside the door itself or for a front door look behind the kick panel, and a rear door it'll be at the base of the pillar - it's been awile since I had the carpets out of my GV
-
The mechanic doing the work is a jeep guy and is bashing suzuki's so I wanna get this done!
That's because he can't come up with a scheme to get you to Just Empty Every Pocket...
Jeep people scare me... ::)