ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: dupont#24 on November 12, 2009, 07:20:36 PM

Title: Alternator
Post by: dupont#24 on November 12, 2009, 07:20:36 PM

I what to use my GM altr when I do my swap from 1.3to1.68vale I am running into this pulley problem it has a v-belt I need a serpentine pulley.Can I drill out the serpentine pulley that came on the 1.6 and put it on the GM altr.Will this work .Or what do yall do  Thanks

Title: Re: Alternator
Post by: dupont#24 on November 13, 2009, 04:33:22 PM

out of 35 know one has run in to this problem  :(

Title: Re: Alternator
Post by: Longtooth on November 13, 2009, 09:16:33 PM

If you can get the pulley on there centered and it doesn't rub on the alternators housing it should work.

Title: Re: Alternator
Post by: sidekicksrock on November 21, 2009, 07:10:37 PM

I may be wrong but I think you can swap your crank and water pump pulleys on to the 1.6

Title: Re: Alternator
Post by: dupont#24 on November 24, 2009, 08:35:01 PM

I took the pulley off of the 1.6 alternator and had it drilled out to fit the shaft on the GM alternator worked perfect thanks