ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: cstello on November 30, 2009, 03:00:15 PM

Title: Samurai hubs
Post by: cstello on November 30, 2009, 03:00:15 PM

I replaced a wheel bearing but am not 100% sure how the hub works and goes back together. DOes the clutch have a spring behind it, or is the only spring in the assembly attached to the outer dial? Any help would be appreciated.

Title: Re: Samurai hubs
Post by: ack on November 30, 2009, 03:05:24 PM

Do a search for locking hub at Ack's FAQ (Link in my signature) for several tutorials on rebuilding a locking hub.

I hope that this helps!

Title: Re: Samurai hubs
Post by: cstello on December 06, 2009, 07:17:42 AM

Thanks Ack! I figured it out.