ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: jamrensuk1 on December 29, 2009, 09:15:37 AM
-
Anyone know where to find rear wheel studs for an 87 samauri in the phoenix az area.
-
Check with your local Suzuki dealer. They can usually order the parts in without issues. You might also check with your local tire dealership as they need to order replacement studs all the time. Napa or Autozone should even be able to pick up a set for you.
You can use studs off of a Geo Tracker/Suzuki Sidekick as well. The front studs are a touch longer then the rear but can also be used without issue.
-
i got my studs at nappa for my 87. dose eneybody know if there are eney beat in type studs i can use for the front of my 87 sammy? the little groves the hold the stud in on the knuckle ar beat up and rounded out. they do not secure the stud . eney ideas?i tried toyota studs but they are to fat.
-
i got my studs at nappa for my 87. dose eneybody know if there are eney beat in type studs i can use for the front of my 87 sammy? the little groves the hold the stud in on the knuckle ar beat up and rounded out. they do not secure the stud . eney ideas?i tried toyota studs but they are to fat.
The later samurais use the splined type studs.
-
you can always put two little tack welds to hold them in place.
-
Check with your local Suzuki dealer. They can usually order the parts in without issues. You might also check with your local tire dealership as they need to order replacement studs all the time. Napa or Autozone should even be able to pick up a set for you.
You can use studs off of a Geo Tracker/Suzuki Sidekick as well. The front studs are a touch longer then the rear but can also be used without issue.
Alot of local stores carry them in stock, or as above post mentioned can order them.