ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: badcat on January 28, 2010, 06:52:01 PM

Title: lug patern
Post by: badcat on January 28, 2010, 06:52:01 PM

can anyone tell me what all lug paterns will interchange   with the geo tracker
also do you think '31's will work with just "2 body lift only?        Thanks in advance

Title: Re: lug patern
Post by: Drone637 on January 28, 2010, 07:06:45 PM

5 on 5.5, same as the Samurai.  You can use old Ford, Dodge and Jeep CJ rims.  Some of the Dodge's do not have a large enough center hole and would need to be bored out.

31 could fit with some trimming and banging of the body.  I would throw on a 2" spacer lift from Jeff as well.

Title: Re: lug patern
Post by: badcat on January 28, 2010, 07:45:24 PM

thanks for info i'm new to offroading i'v seen those suspention spacers if he's the one that has then on ebay
may buy a set later but i'm on small budget i did a home made body lift

Title: Re: lug patern
Post by: wildgoody on January 28, 2010, 08:19:26 PM

Wish I had a maid to build body lifts  ;)

Title: Re: lug patern
Post by: fordguy79 on January 30, 2010, 11:14:35 AM

My maid cleans the house   i can"t get the maid to work on my trucklets   lol

Title: Re: lug patern
Post by: tuxblacray on February 05, 2010, 08:06:18 PM

I went Wednesdayday and picked up my new springs. I am putting 4 door springs under my 2 door along with the 2" strut and spring spacers. This should give me a total of 3-3.5 inches of lift.


Tire Lug pattern s/b 5.5 or 5 X139.7 and here is what I have found to fit so far.....

98 - on Tracker
05 - on Dodge Dakota
04 - on Dodge Durango
94 - 97 Dodge Ram
66 - on Ford Bronco
54 - 97 Ford Truck
03 - on Kia Sorento
94 - 02 Kia Sportage

Suzuki
89 - 97 Sidekick
96 - 98 X90
01 - on XL7
98 - on Vitara
99 - on Grand Vitara

Another option is to reverse the Suzuki rim. (mount with valve stems in) The offset pushes the tires further out. Valve stem holes can be welded shut and a new hole re-drilled.

I am going to use 85 factory Ford aluminium rims and have purchased on Craigslist BFG tires .

Hope some of this info helps! Tux...

Title: Re: lug patern
Post by: badcat on February 06, 2010, 08:21:50 AM

thanks for info