ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: JDMCRX on July 14, 2004, 08:14:51 AM

Title: Cam choices, Isky cams, Calmini, Hawk ??
Post by: JDMCRX on July 14, 2004, 08:14:51 AM

Just wondering guys im looking for more power im going to put .50mm over pistons and new oil pump and bearings. Do ill mild port on the head im just stuck on what cam to get now. I have a k&N intake , header and exhaust. Just wondering which cam is the best midrange cam.??/

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: zookiemike on July 14, 2004, 08:34:50 AM

Im not to sure on performance but. Isky is were it's as far as qulity

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: LawDog on July 14, 2004, 08:42:41 AM

I think Calmini farms out there cams and puts their name on someone else's.  Like their headers.  Maybe someone else can verify this??

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: zookiemike on July 14, 2004, 10:38:09 AM

Probly :-//\

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: Hemogoblin on July 14, 2004, 12:21:21 PM

I've used Isky.  Great product.  They know their stuff.

Cheers,
Steve

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: JDMCRX on July 20, 2004, 03:41:34 PM

I dunno which cam to go with the CALMINI or the ISKY?

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: zookiemike on July 20, 2004, 06:30:36 PM

ISKIDERIAN 8)

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: JDMCRX on July 21, 2004, 01:49:37 AM

Hmm the isky cam is sold threw rocky road and i had bad service but it was just me getting impatiant

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: Bobzooki on July 21, 2004, 02:51:40 AM

I would DEFINITELY give Hawk a close look.

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: JDMCRX on July 21, 2004, 03:13:12 AM

hmm has anyone used the Hawk cam?

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: Bobzooki on July 21, 2004, 04:28:17 AM

Quote

hmm has anyone used the Hawk cam?

Call and ask!  I'm guessing Rick Hawkins uses it in his Kick.

Also, I think that only Hawk has cams for the 16 valve engine.

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: JDMCRX on July 21, 2004, 08:29:29 AM

Im debating i want some more low and mid power

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: ZukkinMad on July 21, 2004, 12:58:03 PM

I have been using the Hawk Cam for a while now, and it works just fine for me, it works from around 1000 - 4000rpm.

Zukk

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: Agent Orange on July 21, 2004, 02:17:22 PM

have you tried looking into colt cams. they are made here in bc, and are probably cheaper than the name brands. i know of a couple of folks who have them on there 8v motors, and they say good things about them, and they also make cams for the 16v too.

Title: Re: Cam choices, Isky cams, Calmini, Hawk ??
Post by: JDMCRX on July 21, 2004, 02:59:43 PM

I heard about colt cams anyone using them and how much CDN?