ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: goldfinder on February 06, 2010, 07:54:45 AM

Title: 88 suzuki sammy 1.3
Post by: goldfinder on February 06, 2010, 07:54:45 AM

I need the 8 nuts for my piston rods. Can someone tell me the size I need to ask for?  Thanks  Goldfinder  Is there no one out there that knows the answer to this question or where I could contact to find out?  Thanks

Title: Re: 88 suzuki sammy 1.3
Post by: wildgoody on February 07, 2010, 10:43:55 AM

Those are a high strength nut, I know they are metric, I can check the size
tomorrow, I don't have the rods here at the house

Wild

Title: Re: 88 suzuki sammy 1.3
Post by: Bobthebiker on February 07, 2010, 11:09:40 AM

couldnt you just go to a dealer and ask for the nuts?    I would suggest a junk yard,but samurais arent commonly FOUND in a junkyard even.

Title: Re: 88 suzuki sammy 1.3
Post by: shakydoug on February 07, 2010, 11:39:15 AM

Good Luck, my closest dealers' nuts are 250 miles,  maybe shop some local junk yard small motor rods for nuts, or wait til ur n8ber go to sleep

Title: Re: 88 suzuki sammy 1.3
Post by: wildgoody on February 07, 2010, 03:00:08 PM

You can find stuff like this at an automotive machine shop, but
you will want to know what size, or just take a rod to the machine
shop for sizing.

These nuts are peined so they will not vibrate loose, so you
can't just go get a grade 8 nut that fits