ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: Bobthebiker on February 14, 2010, 03:33:47 PM

Title: carb removal question on 87 samurai.
Post by: Bobthebiker on February 14, 2010, 03:33:47 PM

I'm lookin at the carburetor on my samurai, and I have no idea how to remove it without pulling a lot of motor parts out in the process.   

I could use a little advice on that.       other than that, I'm pretty impressed with this little truck.  freakin thing looks like a military vehicle, but more comfortable.

Title: Re: carb removal question on 87 samurai.
Post by: oak_raid on February 15, 2010, 08:12:44 AM

Its pretty simple, actually.  The hardest part for me was the accelerator cable. 

As I recall, you need to remove the two water lines from the rear, there are i believe 5 electrical harness connectors to take apart, the accelerator cable and a few vacuum lines.  And, of course the fuel line.  Then just take the 4 nuts off at the bottom of the carb and it comes right off.  I believe they are 12mm nuts.

Title: Re: carb removal question on 87 samurai.
Post by: Bobthebiker on February 15, 2010, 09:50:27 AM

Thanks.    I didnt want to just tear into it with no clue how the devil to get it off.    I hate working on a vehicle and breaking more than I fix.