ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: ZukkinMad on July 18, 2004, 12:14:31 AM

Title: Ignition Coil question
Post by: ZukkinMad on July 18, 2004, 12:14:31 AM

Hey Guys,

I have a Accel Super Coil (cannister type ignition coil) to install in my kick. One the OEM coil there is a brown and black wire at the bottom which i believe are the + and -, but at the top of the coil there is a blue, orange and black wire. Do these have to be connected, or can i just leave them off?

Zukk

Title: Re: Ignition Coil question
Post by: 1bigtracker on July 18, 2004, 04:51:56 AM

http://www.zukiworld.com/cgi/yabb/YaBB.pl?board=suzuki_talk;action=display;num=1089758488
we where talkin about this a few weeks ago.

stu

Title: Re: Ignition Coil question
Post by: explosivo on July 18, 2004, 06:55:53 AM

Since I just did this: Brown = neg; Black = pos.

Title: Re: Ignition Coil question
Post by: ZukkinMad on July 18, 2004, 11:30:24 AM

Ok,

What about the connector at the top of the OEM coil with the blue,orange and brown wire, do i just leave that off?

Zukk

Title: Re: Ignition Coil question
Post by: explosivo on July 18, 2004, 11:44:12 AM

I left that alone and everything seems to be working fine... Can someone fill us in on what that is?

Title: Re: Ignition Coil question
Post by: Rhinoman on July 20, 2004, 05:09:58 AM

I haven't seen my FSM since I moved house :(.  I'd guess its from/to the back up ignition circuit

Title: Re: Ignition Coil question
Post by: TomKat on July 20, 2004, 09:45:53 AM

Quote

Ok,

What about the connector at the top of the OEM coil with the blue,orange and brown wire, do i just leave that off?

Zukk

IIRC that is called the ignitor , you'll need to leave that connected to keep sparks flying.