ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: meevans21 on March 02, 2010, 02:33:12 PM
-
Hello,
I had both master and slave cylinders replaced in attempt to cure a leak. Problem still occurs. Where else should we look for a leak? Or is there something else that could cause fluid level to go down?
-
did you also replace the line between the slave and master cylinders? if no, you've still got a potential leak point. or possibly you still have air in the system that must be bled out.
-
It was done by a local shop so I will check my invoice. Thanks.