ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: forcedzukmech on March 17, 2010, 09:17:25 AM

Title: 86 Samurai front to rear diff swap
Post by: forcedzukmech on March 17, 2010, 09:17:25 AM

Are the 3rd members interchangeable on stock axels from the same vehicle?

Title: Re: 86 Samurai front to rear diff swap
Post by: ebewley on March 17, 2010, 01:51:44 PM

Quote from: forcedzukmech on March 17, 2010, 09:17:25 AM

Are the 3rd members interchangeable on stock axels from the same vehicle?

I think your asking if you can swap 3rd members front to back on a Samurai. If so, then the answer is no. While the 3rds are very similar and will physically fit, one must change the sidegears, which do interchange, in order to swap front to back. The front axles are 22 spline and the rear are 26.

Hope that helps, Eric

Title: Re: 86 Samurai front to rear diff swap
Post by: blknight87 on March 17, 2010, 01:54:35 PM

Quote from: ebewley on March 17, 2010, 01:51:44 PM

Quote from: forcedzukmech on March 17, 2010, 09:17:25 AM

Are the 3rd members interchangeable on stock axels from the same vehicle?

I think your asking if you can swap 3rd members front to back on a Samurai. If so, then the answer is no. While the 3rds are very similar and will physically fit, one must change the sidegears, which do interchange, in order to swap front to back. The front axles are 22 spline and the rear are 26.

Hope that helps, Eric

so are you saying Eric, that you can easily swap out the side spider gears, and then you can install it into your rear axle housing? is it that simple?

Title: Re: 86 Samurai front to rear diff swap
Post by: ebewley on March 17, 2010, 02:09:27 PM

Quote from: blknight87 on March 17, 2010, 01:54:35 PM

Quote from: ebewley on March 17, 2010, 01:51:44 PM

Quote from: forcedzukmech on March 17, 2010, 09:17:25 AM

Are the 3rd members interchangeable on stock axels from the same vehicle?

I think your asking if you can swap 3rd members front to back on a Samurai. If so, then the answer is no. While the 3rds are very similar and will physically fit, one must change the sidegears, which do interchange, in order to swap front to back. The front axles are 22 spline and the rear are 26.

Hope that helps, Eric

so are you saying Eric, that you can easily swap out the side spider gears, and then you can install it into your rear axle housing? is it that simple?

Yeah. The sidegears are the difference between front and rear 3rds. So if you feel comfortable changing them, (should put in a locker while your at it) then yes, it's that simple.

Plus one for helping? :)

-Eric

Title: Re: 86 Samurai front to rear diff swap
Post by: forcedzukmech on March 17, 2010, 04:26:01 PM

Hey ebewley thanks for the help thats exactly what I needed.

Title: Re: 86 Samurai front to rear diff swap
Post by: blknight87 on March 17, 2010, 07:26:47 PM

here's another Eric.... Thanks for ALL your help in the forum... no matter how big, or small the problem is, you always seem to have the advice some one is looking for... my hat's off to you my friend!