ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: HugoSamurai on March 21, 2010, 12:38:06 PM

Title: inlet manifolds for 1.6 8v engine
Post by: HugoSamurai on March 21, 2010, 12:38:06 PM: hello, know you tell me the cars that use the intake manifold that fits in the suzuki 1.6 8v? :)
Title: Re: inlet manifolds for 1.6 8v engine
Post by: fordguy79 on March 21, 2010, 03:32:23 PM: most 1.3s intakes will fit
Title: Re: inlet manifolds for 1.6 8v engine
Post by: HugoSamurai on March 21, 2010, 05:15:57 PM: Quote from: fordguy79 on March 21, 2010, 03:32:23 PM
most 1.3s intakes will fit

you refers to the suzukis 1.3 ou another cars? i need to know manifolds of another car brands ;)
Title: Re: inlet manifolds for 1.6 8v engine
Post by: wildgoody on March 21, 2010, 05:37:32 PM: Only Suzuki powered 1.3 and 1.6 vehicles as far as I know
Title: Re: inlet manifolds for 1.6 8v engine
Post by: HugoSamurai on March 28, 2010, 05:08:28 PM: up
Title: Re: inlet manifolds for 1.6 8v engine
Post by: Drone637 on March 30, 2010, 03:02:48 PM: Wildgoody has it correct. The intake will have to be from either a 1.3L or a 1.6L 8 valve.

With the 1.3L intake you can adapt it to use a variety of carburettor. Everything from Harley Davidson side drafts to Hyundai Pony carbs have been used with success.
Title: Re: inlet manifolds for 1.6 8v engine
Post by: HugoSamurai on March 30, 2010, 03:21:01 PM: btt i already have a 1.3 inlet in my 1.6, but i like to now more variaty of inlets ;)
Title: Re: inlet manifolds for 1.6 8v engine
Post by: wildgoody on April 08, 2010, 08:54:24 AM: You will have to cut, hack and weld together either a custom manifold
or pieces of other stock manifolds.

Wild
Title: Re: inlet manifolds for 1.6 8v engine
Post by: ackzuki on April 15, 2010, 01:11:38 PM: sorry for stealing your thread, will a 1.3 8v intake fit a 1.6 16V?
Title: Re: inlet manifolds for 1.6 8v engine
Post by: Rhinoman on April 15, 2010, 03:00:53 PM: Sort off, you need to fit a plate between the head and the manifold to blank off the injector cutouts and then find some way of running the ignition. It is possible to use a Sammy dizzy but you need to reverse the direction.
Title: Re: inlet manifolds for 1.6 8v engine
Post by: jimbooth019 on May 23, 2010, 04:37:50 AM: You can get a new dual weber dcoe manifold on ebay. I emailed the seller and he will sell only the manifold.