ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: yzf438 on March 24, 2010, 05:19:23 PM
-
ok here is goes got a 88 samurai going to put power steering, from a tracker.. found a 97 box and pump.. is this going to work. is this the correct year to convert this sammy?? it has the serpintine belt. I have v belts what do I do about this??
-
Get a v-belt pulley for the pump???
Okay, that was out of line - sorry.
I found what looks to be a 95 4-door Tracker (or at least one earlier than 1996 because of the dash - yet fairly new because it had a steering wheel airbag) with a v-belt pulley in a secret location, so I know that they exist.
You could have a serpentine accessory pulley redrilled for the 4-bolt 1.3 crankshaft - or keep looking.
& no, I ain't tellin' you where that pump is! It's MINE
MINE, I SAY!!!!!
-
spider trac makes the v belt on for the motor pulley with the serpintine on the outside for the pump. 125 bucks for the box and pump and resv.with hoses didn't think that was to bad.
-
I found what looks to be a 95 4-door Tracker (or at least one earlier than 1996 because of the dash - yet fairly new because it had a steering wheel airbag) with a v-belt pulley in a secret location, so I know that they exist.
You could have a serpentine accessory pulley redrilled for the 4-bolt 1.3 crankshaft - or keep looking.
& no, I ain't tellin' you where that pump is! It's MINE
MINE, I SAY!!!!!
Maybe that is some sort of aftermarket PS, because trackicks never had vbelts (other than the few 89s that had the 1.3 engine).
Also, 96 was the first year for airbags in trackicks. So maybe it's possible that someone swapped a later steering wheel in an earlier trackick.
Or maybe that is just one cobbled up/bastardized trackick......either way, we need pics!!!
yzf.....that pump and box will work. There are a few options for pulleys/belts.....
1) find an early 2 piece trackick crank pulley and use the front pulley in front of the samurai pulley to drive the PS pump. The trackick pulley will have to be redrilled....not a big deal.
2) use the complete trackick crank pulley (redrill it for the samurai crank bolt pattern). Use the matching water pump pulley and a trackick alternator (both swap right onto a samurai).
3) get the combo crank pulley (vbelt/ribbed belt) pulley from a vendor.
4) find a vbelt pulley for the PS pump (I would recommend one of the other options). You also have to have, or find, the double vbelt crank pulley for a samurai (it is the crank pulley for a samurai that had AC).
-
will the rag joint work off my samurai or do I need to get a u joint?
-
will the rag joint work off my samurai or do I need to get a u joint?
Unless you buy the kit that has the wedge that goes between the steering box and frame (to align the steering box parallel with the frame), you will have to use a ujoint in the lower part of the steering shaft.
-
ok will have to look at that. I m fab ing my own kit. so that will be easy to do. but it looks like the box bolts on flat against the frame and will line up correctly. am I missing something that I need to change on my mounting adaptor> all the pics I looked at were just a flat plate with countersunk bolts ,
-
ok took anouther look see what your talking about. added a little more fabbing but no prob. looks like almost a 3/4 to 1 inch of wedge in the plate needed. do I need to put my samurai pitman arm on or can I use the sidekick one? anyone know what is the best way
thanks
-
You have to use the trackick pitman arm. The samurai one won't fit the trackick box.
-
thanks a bunch . easy little fab and will have power steering as soon as my pulley gets here.
-
An help come from Portugal ;D
(http://img202.imageshack.us/img202/6889/fotos0036u.jpg)
By null (http://profile.imageshack.us/user/null), shot with SGH-D980 (http://profile.imageshack.us/camerabuy.php?model=SGH-D980&make=SAMSUNG) at 2010-03-28
(http://img202.imageshack.us/img202/7804/fotos0037.jpg)
By null (http://profile.imageshack.us/user/null), shot with SGH-D980 (http://profile.imageshack.us/camerabuy.php?model=SGH-D980&make=SAMSUNG) at 2010-03-28
(http://img202.imageshack.us/img202/3797/fotos0038.jpg)
By null (http://profile.imageshack.us/user/null), shot with SGH-D980 (http://profile.imageshack.us/camerabuy.php?model=SGH-D980&make=SAMSUNG) at 2010-03-28
(http://img202.imageshack.us/img202/7435/fotos0039.jpg)
By null (http://profile.imageshack.us/user/null), shot with SGH-D980 (http://profile.imageshack.us/camerabuy.php?model=SGH-D980&make=SAMSUNG) at 2010-03-28
(http://img202.imageshack.us/img202/8152/fotos0040.jpg)
By null (http://profile.imageshack.us/user/null), shot with SGH-D980 (http://profile.imageshack.us/camerabuy.php?model=SGH-D980&make=SAMSUNG) at 2010-03-28
-
I use serpintines belt because i have a 1.6 engine from vitara... ;)
-
hey thanks for the pics. I have everything cut out. just need to yank my box out and weld it up. should be quick once the pulley gets here. week?? hurry up ups