ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: stoneykrawler on April 02, 2010, 11:52:35 PM

Title: will they fit
Post by: stoneykrawler on April 02, 2010, 11:52:35 PM

i hav 92 tracker with 1.5" front  and 2" rear coil spacers. I ordered 29x11.50 ssr super swampers, will they fit or do i need more room

Title: Re: will they fit
Post by: 89tracker43000 on April 03, 2010, 07:35:18 AM

they should.

Title: Re: will they fit
Post by: john1974 on April 03, 2010, 12:03:12 PM

Yes they should with a 3inch coil lift I got 31x10'5s to fit.  I had to trimm the rear part of the fender but they fit pretty good other than that.

Title: Re: will they fit
Post by: jawman on April 03, 2010, 09:57:53 PM

I think you are good to go, but it depends on the wheels you use to Like the width and backspacing. you might have to trim the fender just a little.

Title: Re: will they fit
Post by: stoneykrawler on April 03, 2010, 10:10:32 PM

i have old school chrome directionals 15x8 dunno spacing, i dont mind trimming the bumper cause ild likie some new ones, but tracker is in great shape and dont want to cut the fenders        N e one know were to get cheap steel bumpers

Title: Re: will they fit
Post by: djlantis57 on April 04, 2010, 09:47:51 PM

Quote from: stoneykrawler on April 03, 2010, 10:10:32 PM

N e one know were to get cheap steel bumpers

I've seen many people on here remove the plastic bumper skin, and repaint the factory bumper metal crush bars with some fresh black paint, and use them.  They look rugged and really good, do the job just as well (after all, they're still factory), and the best part, they're FREE (minus the cost of rattle-can)!  Get lots of clearance that way, both front and rear.  I was gonna do this at first but things were going well enough for me to buy new bumpers.
DJ

Title: Re: will they fit
Post by: jawman on April 05, 2010, 06:36:35 PM

Quote from: djlantis57 on April 04, 2010, 09:47:51 PM

Quote from: stoneykrawler on April 03, 2010, 10:10:32 PM

N e one know were to get cheap steel bumpers

I've seen many people on here remove the plastic bumper skin, and repaint the factory bumper metal crush bars with some fresh black paint, and use them.  They look rugged and really good, do the job just as well (after all, they're still factory), and the best part, they're FREE (minus the cost of rattle-can)!  Get lots of clearance that way, both front and rear.  I was gonna do this at first but things were going well enough for me to buy new bumpers.
DJ

does anyone have pictures of the inner bumper painted up and installed?

Title: Re: will they fit
Post by: ridgerat4x4 on April 05, 2010, 08:14:04 PM

i will take a pic of the rear one on mine for you tomorrow i haven't done my front one yet just removed the rear cover i haven't even painted it yet but IMO it would look pretty decent painted up i haven't done the front yet cause we run in to a lot of small brush and bier patch's and i haven't got to make a guard for the rad yet probably don't need it just make me feel better.