ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: dellstoptracker on April 03, 2010, 03:44:07 PM
-
I need some pictures of ideas to do rear 6 1/2 speakers on my 90 2dr tracker. I was gonna use the stock location but not enough room. I would rather not downsize to 5 1/4s since they lack the bass I would like
thanks!
-
BRD HNTR put some larger speakers in without any issues by moving it further back. A few other people have done similar:
(http://lh5.ggpht.com/_WIV2vVCibx0/SD498flJhsI/AAAAAAAAAwU/3_RM8g8168w/s512/CIMG2433.JPG)
-
i have 6 1/2's in the stock location on my truck. trim the mounting ring on the speaker and trim out the sheet medal. im wanting on a 10" sub to go in the back (truck just doesnt have enough bass to keep up with the the other car (jl 6 1/2 components, 6x9s in the rear and dual 12's) the kick only has the 4"ers and the 6.5's
-
I have 4" Alpine Type-S speakers in the front and 6.5" Alpine Type-S in the rear factory locations. The panel in the rear almost contactsxthe tweeter portion but in the pas 4 years I've had no issues. I did blow the front left speaker but over time the speakers droped price and I got a pair for $46 shipped.
I also have a 8" JL w1 sub in a ported box that just fits behind the rear seat (have to shut rear door with a little effort). Has a small Alpine amp powering it.
-
I have 6x9s in mine above the wheel wells.
In the trail rig, we used the hole left from removing the seatbelt towers.
(http://www.zukiworld.com/forum/gallery/0/575_04_04_10_5_36_29_1.JPG)
The daily driver, with the seat belt towers left in.
(http://www.zukiworld.com/forum/gallery/0/575_04_04_10_5_36_29_0.JPG)