ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: BIGTSV on April 12, 2010, 08:59:13 AM

Title: Hagen Sawp on a Sidekick question
Post by: BIGTSV on April 12, 2010, 08:59:13 AM

Can you modify the A Arm mounts without doing the axle swap? I would like the A arms to be located 1 inch out yet Im not concerend about running the same axles on both sides

Thanks
Tom

Title: Re: Hagen Sawp on a Sidekick question
Post by: wildgoody on April 12, 2010, 09:12:50 AM

nope, the CVs will pull apart

Title: Re: Hagen Sawp on a Sidekick question
Post by: BIGTSV on April 13, 2010, 09:46:31 AM

So using the long axle cut down makes it long enough to be ok on the short side.That makes sense now!