ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: whtboy333 on April 13, 2010, 07:26:21 AM

Title: 93 Track Front end
Post by: whtboy333 on April 13, 2010, 07:26:21 AM

I just picked up a 93 track with a little bit of front end damage the front fender and inner fender need to be replaced has anyone done this before is ther any welding requered or is it all bolt on i havent really looked deeply at it yet just want to know what im up agenst. 

Title: Re: 93 Track Front end
Post by: Bobthebiker on April 13, 2010, 08:05:35 AM

Generally, most bodyparts bolt up, I've not encountered a vehicle that has bodyparts welded from the factory.   not to say nobody made cars like tht, but I've not seen any.

Title: Re: 93 Track Front end
Post by: whtboy333 on April 14, 2010, 02:55:49 AM

thanks for the help body work has always intimidated me. 

Title: Re: 93 Track Front end
Post by: bentparts on April 17, 2010, 05:57:46 AM

Replacing sheet metal and bumpers and such is strictly bolts and screws, but take a good look at the frame , it has built in crush sones in the front, just behind and forward of the the struts. These tend to bend easily in an impact so be sure yours are straight. Same with the top strut mounts.