ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: MadMaxZuki on April 18, 2010, 02:27:48 PM

Title: transmission output seal
Post by: MadMaxZuki on April 18, 2010, 02:27:48 PM

i have an 88 samurai, i am leaking oil from the back of the tranny. i pulled the drive shaft out and im  not sure what to do next to get to the seal.

Title: Re: transmission output seal
Post by: john1974 on April 18, 2010, 04:10:12 PM

Quote from: Mbrancieri on April 18, 2010, 02:27:48 PM

i have an 88 samurai, i am leaking oil from the back of the tranny. i pulled the drive shaft out and im  not sure what to do next to get to the seal.

You can buy a seal puller and pull the old seal out.  Then use a clean rag and clean it up in there make sure you lube the new oil seal and when you install it make sure you are carefull not to bend it, or push it in uneven.