ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: jzap on April 23, 2010, 08:08:26 PM

Title: Replacing the donut
Post by: jzap on April 23, 2010, 08:08:26 PM

'96 Tracker 1.6 16V 5spd...  The nuts on the exhaust flange ahead of the "cat" are rusted solid.  I need to replace the donut, and even PB Blaster doesn't seem to help.   Are those bolts that can just be cut and replaced, or are they studs that would have to be drilled out?

Title: Re: Replacing the donut
Post by: wildgoody on April 23, 2010, 09:29:08 PM

They are studs I think, spray and repeat, drive in between time, the
heat might work with the PB to get them off

Wild