ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: espo on May 08, 2010, 10:15:57 PM

Title: Reduction Percentage
Post by: espo on May 08, 2010, 10:15:57 PM

How much reduction percentage do I need to get back to stock. Im running a sami with sammy t-case and toyota axles. Its lifted on 33" boggers?

Title: Re: Reduction Percentage
Post by: SnowSammi on May 08, 2010, 11:55:25 PM

To get fifth gear back and good performance on/off road 6.4:1 w/33's,
this will drop you lower than stock but give a better boost in performance.
Remember to purchase stronger tranfer case mounts and bracket, bigger tires
and lower gears will twist things up.

Title: Re: Reduction Percentage
Post by: Amilla on May 10, 2010, 11:29:33 AM

6.5:1's will do you just right.  You running 4.10 R&p?

Amilla

Title: Re: Reduction Percentage
Post by: Drone637 on May 10, 2010, 02:01:22 PM

http://www.solemnwarning.net/transmission/ (http://www.solemnwarning.net/transmission/)

It even has Suzuki SJ series available with the aftermarket gear sets.  Just select your model, your axle ratio and put the tire size in at the bottom and calculate.

Title: Re: Reduction Percentage
Post by: espo on May 10, 2010, 08:36:13 PM

I think there 4.10's in the yota axels

Title: Re: Reduction Percentage
Post by: Amilla on May 11, 2010, 12:20:53 PM

4.10's and 6.5's are a pretty good mix for 33's.  The extra reduction from the R&p will make your 5th gear a little more useful.


Amilla