ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: zuk_freak on May 24, 2010, 08:34:32 PM

Title: track/kick dual t case????
Post by: zuk_freak on May 24, 2010, 08:34:32 PM

has anyone done a dual t case set up in there track/kick??? if so how did u do it and can i see some pics....

Title: Re: track/kick dual t case????
Post by: Skyhiranger on May 24, 2010, 09:50:23 PM

You asking about any dual tcase setup, or one in particular (like trackick/trackick, trackick/samurai, etc.)?  I know a few have done the trackick/samurai setup, but I don't know if anyone on here has that setup.

Title: Re: track/kick dual t case????
Post by: zuk_freak on May 25, 2010, 03:42:11 PM

yeah i was wondering about trackick to any divorced t case such as the samurai t case. i was also wondering about drive shaft angles and how the divorced case was held up in the frame.

Title: Re: track/kick dual t case????
Post by: Skyhiranger on May 26, 2010, 07:17:17 AM

Quote from: zuk_freak on May 25, 2010, 03:42:11 PM

yeah i was wondering about trackick to any divorced t case such as the samurai t case. i was also wondering about drive shaft angles and how the divorced case was held up in the frame.

While I have never done dual tcases in a trackick...
I would think the rear dshaft angle might be kinda steep on a 2 door.
You would have to make new frame mounts to hold the new tcase, of course.

Title: Re: track/kick dual t case????
Post by: Drone637 on May 26, 2010, 11:38:20 AM

Check out the Kicker series from OTT Industries.  There is also the Shogun, by Rock 4X Fabrication, that allows you to combine your Tracker T-Case with a Samurai T-Case similar to the Kicker 3.

http://www.ottindustries.com/kicker3.htm (http://www.ottindustries.com/kicker3.htm)

Title: Re: track/kick dual t case????
Post by: zuk_freak on May 26, 2010, 09:46:47 PM

thanks for the help guys. i think if im gunna be doing this im gunna do my own thing not buy it. i saw this one picture online somewhere where the guy cut up the kick t-case removing the front output and made a plate to covor it. then he made a frame from t-case to t-case so the rear transfer case (samurai) was held up. seems to be not that tricky?? :P i just wonder how hard it would be to make the covor to covor where you cut...... hope this makes sence. here's a pic.

Title: Re: track/kick dual t case????
Post by: 87zukini on May 28, 2010, 03:17:05 AM

i am doing this mod this winter when i put in my 1.6 and im building it not buying

Title: Re: track/kick dual t case????
Post by: zuk_freak on May 28, 2010, 07:22:53 AM

Do you know how you will be doing it???

Title: Re: track/kick dual t case????
Post by: Skyhiranger on May 28, 2010, 07:38:27 AM

Here is my DIY build that I did for a "kicker 3", "shogun", doubler, whatever you want to call it.

http://bbs.zuwharrie.com/content/topic,46349.0.html (http://bbs.zuwharrie.com/content/topic,46349.0.html)