ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: ldodge92 on May 25, 2010, 03:54:49 PM

Title: Stock ford wheels?
Post by: ldodge92 on May 25, 2010, 03:54:49 PM

Anyone know the exact year make and model of ford wheels that will fit a sidekick?

Title: Re: Stock ford wheels?
Post by: Bobthebiker on May 25, 2010, 04:16:27 PM

I think older F150 rims will work, like 70's through 97,   as well as some Dodge half ton wheels, 2000 Ford Expedition rims will as well, although they're 16" wheels, and youll need to lift it to fit them.     Theres a lot out there,  I'd google what vehicles run a 5x5.5" bolt pattern and go from there.

Title: Re: Stock ford wheels?
Post by: fuzzy1 on May 25, 2010, 04:51:35 PM

Recently added to the FAQ:

http://www.zukiworld.com/forum/technical-discussion-beginner-repair/92-sidekick-rims/ (http://www.zukiworld.com/forum/technical-discussion-beginner-repair/92-sidekick-rims/)

Handy list there. Also fyi, you can get new steel wheels that will fit for around $40 each from places like summitracing.com. I got my 15x7 Cragar soft 8's there. Jegs & JCWhitney would prolly have em too.

Hth,
Fuzz

Title: Re: Stock ford wheels?
Post by: ldodge92 on May 25, 2010, 05:35:08 PM

Thanks alot guys. helped out alot. Headed to the junk yard tom.

Title: Re: Stock ford wheels?
Post by: woof359 on May 25, 2010, 07:29:25 PM

its the center hole you half to worry about, some Ford Rims dont have one big enough to clear a Sam hub.

Title: Re: Stock ford wheels?
Post by: wildgoody on May 25, 2010, 11:57:46 PM

Ya, center needs to be 4-1/4" or 105 mm

Title: Re: Stock ford wheels?
Post by: tombstone on May 26, 2010, 05:00:29 PM

Got the best of both worlds,two Samurai and a '91 Dodge Power Ram 150 4x4...wheels interchange!!

Title: Re: Stock ford wheels?
Post by: ldodge92 on May 27, 2010, 07:46:12 PM

Thanks for the help everyone. Looked in every junk yard around and no good. Just bought a new set of steel wheels

Title: Re: Stock ford wheels?
Post by: FLAmini13 on June 05, 2010, 06:36:01 PM

I know this comes a little late but here are some I found in a post earlier today

Dodge 1/2 & 3/4 ton pick up  1984-93
Ford F-150                         1948-96
Ford Bronco                       1966-96
Jeep CJ                             1946-85

Not my research so I am taking their word on these models fitment...

Title: Re: Stock ford wheels?
Post by: tuxblacray on June 15, 2010, 02:07:30 PM

I have stock 93 Ford Outlaw rims on my Vitara. But...... I had to put them on a Bridgeport Mill and rework the center. As stated earlier the center needs to be 4 1/4. I have had mine on the Vitara now for about 10k miles with no issues.

Title: Re: Stock ford wheels?
Post by: TNTracker on July 01, 2010, 07:02:39 PM

I had factory aluminum 95 ford xlt wheels on a 97 Kick i had and would love to find another set but they are hard to find. The centers did have to be turned out.

Title: Re: Stock ford wheels?
Post by: Drone637 on July 02, 2010, 10:50:38 AM

Those do look nice.

Title: Re: Stock ford wheels?
Post by: beagle..t on July 02, 2010, 10:37:45 PM

hey tnt those r the hard rims to find even if u have too turn the centers 108mm instead of 87mm