ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: TNTracker on June 25, 2010, 09:03:43 AM

Title: WTB: Wheels and Tires
Post by: TNTracker on June 25, 2010, 09:03:43 AM
Looking for a set of 15x8 black spoke wheels 5x5 1/2 bolt pattern with 30x9.5 mud tires with at least 50% tread or better. If you have either or both for sale let me know.
Title: Re: WTB: Wheels and Tires
Post by: jow003 on June 25, 2010, 09:28:47 AM
i got stock white wagons 15x7 and 29x850s.  i know its smaller all the way around by a little but they still have a ton of tread
Title: Re: WTB: Wheels and Tires
Post by: TNTracker on June 25, 2010, 01:10:03 PM
i got stock white wagons 15x7 and 29x850s.  i know its smaller all the way around by a little but they still have a ton of tread

What brand are the tires?
Title: Re: WTB: Wheels and Tires
Post by: jow003 on June 25, 2010, 02:15:56 PM
haha sorry, bias ply TSLs
Title: Re: WTB: Wheels and Tires
Post by: TNTracker on June 25, 2010, 04:28:10 PM
You got a PM.
Title: Re: WTB: Wheels and Tires
Post by: ncspack7civic on June 27, 2010, 03:07:53 PM
Im in the same boat. Im looking for the same set up!
Title: Re: WTB: Wheels and Tires
Post by: TNTracker on June 28, 2010, 06:28:48 AM
Im in the same boat. Im looking for the same set up!

I found a set of 31s maxxis buckshots that have maybe 300 miles on them cheap, but i dont know how much rub i will have only running 2" coil spacers. I dont mind to cut alittle but i dont want to hack half the fender off either. I had a set on my Vitara but i also had a 2" bodylift. I hate to buy another new set because everytime i do i end up selling whatever i but them on a few months later.
Title: Re: WTB: Wheels and Tires
Post by: z28cam1981 on July 03, 2010, 07:40:32 AM
I have 31-10.5 all terrains with 2 inch coil spacers and they fit great all I had to trim was the metal lip inside the fender that goes on the firewall I cut that flat about half way up and just welded it flat because they have pinch welds on the part I cut off and on the fender i cut from the front lower fender bolt to the outside of the fender at an angle so you can't see the cut at all from the outside and the back is fine, but It all depends on your offset of the wheels mine just work out when I flex they tuck perfectly in the back. hope this helps