ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: TNTracker on June 28, 2010, 06:33:40 AM

Title: 31s with 2" coil spacers
Post by: TNTracker on June 28, 2010, 06:33:40 AM

Is anyone running 31s with only 2" coil spacers if so how much rubbing. Would like to see a picture of one with this setup also if anyone has one. Almost forgot its a 93 Track/Kick. Thanks

Title: Re: 31s with 2" coil spacers
Post by: ZookPower on June 28, 2010, 08:37:33 AM

Hey,

I am running 2" aluminum coil spacers and 31" X 10.5" X 15" tires.  I did no trimming in the rear and to be honest i trimmed the front fender too much.  The key seems to be the backspacing of the rim, I have 3.75" backspacing and it seems to be fine.


(http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs585.snc3/30845_423914720008_507425008_4858499_1766017_n.jpg)

Title: Re: 31s with 2" coil spacers
Post by: TNTracker on June 28, 2010, 09:45:00 AM

Looks good thanks for posting the pic. So you had no issue with rubbing in the front of the wheel well on the rear?

Title: Re: 31s with 2" coil spacers
Post by: cj on June 29, 2010, 12:40:42 AM

I've just put some 31's (7" rim with a P15 offset) on a swb with no lift. I've folded the seam flat in the back of the front wheelwell (retained the plastic liner), trimmed the front bumper and used some bumpstop spacers but I haven't fully tested it yet to be absolutely sure but so far it seems pretty good.

Title: Re: 31s with 2" coil spacers
Post by: djlantis57 on June 29, 2010, 03:29:17 PM

Interested in seeing this too.  If anyone has a pic of how 31's look on stock 15x5.5 rims, I want to see that.
How does the offset of Samurai rims compare to trackick rims?

Title: Re: 31s with 2" coil spacers
Post by: ZookPower on June 30, 2010, 09:39:24 AM

Just to clarify, the rears are not rubbing.  My rims are 8" wide. 

Title: Re: 31s with 2" coil spacers
Post by: ldodge92 on July 01, 2010, 02:40:05 PM

Im running 31x10.50s on 15x8 rims. Had to take off the front bumber and front fenders. And had to do a little cutting on the inner fender but it can be done. And ive tested mine to its fullest.