ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: djlantis57 on July 14, 2010, 01:34:13 AM
-
Small oil leak at my distributor. 1.6L 8v in a 90 Tracker. It's been there since I bought it and now that I'm trying to stop engine oil leaks, I might as well focus on this, too. Question is, what is there that could be leaking?
I know there is some sort of o-ring on the distributor shaft, but can't buy it anywhere. Is there also some kind of a gasket or seal for the actual distributor housing itself?
I really want to do this myself, but not too confident about timing the engine, especially since it doesn't run too well at the moment. I may just send it in to get worked on and figure out my high cold start idle at the same time. Damn demons in the engine compartment >:D
-
I bought a new o-ring for my distributor from Hawk Suzuki. http://www.hawksuzukiparts.com/ (http://www.hawksuzukiparts.com/)
I don't see it listed on their site so might have to give them a call.
-
You can also take the old one to a good autoparts store and just match
it to a new one, add a little gray silicone to the O-ring and the housing
and it will be leak free for a long time
Wild
-
http://www.kick-fix.com/buy-parts.html#Dizzy-rings (http://www.kick-fix.com/buy-parts.html#Dizzy-rings)
Look thru this.
-
Yes, there are two orings...one on the disty shaft, one between the housing and the back of the head.
-
That link gave great info...I'll also call Hawk to see what they got. If they got it, I'll try to get it by next week.
Getting a visual helped tons, it was linked on that page that ranger88den linked to:
http://markb.smugmug.com/gallery/4606153_GPWWw#271666242_FGJMC (http://markb.smugmug.com/gallery/4606153_GPWWw#271666242_FGJMC)
-
When I did my valve guide seals way back, not only did I replace the O ring, but I used a gasket sealer on the two surfaces. No leaks in 48k miles and still going strong.
-
some people use rtv between dist and head
-
I bought a new o-ring for my distributor from Hawk Suzuki. [url]http://www.hawksuzukiparts.com/[/url] ([url]http://www.hawksuzukiparts.com/[/url])
I don't see it listed on their site so might have to give them a call.
Yep, do a search of a few suzuki aftermarket companies I know a few sell them.