ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: Stagecarpenter on July 31, 2010, 03:23:31 PM

Title: Strut Tower Brace
Post by: Stagecarpenter on July 31, 2010, 03:23:31 PM

Hey everyone,
       First post here.I just purchased a 2001 GV.It has a Calmini 2.5 inch lift and a 2 inch body lift. Someone left the strut tower brace off,and I'm looking to make a new one.My problem is I don't know the center to center spacing for the brace.I would also consider buying a used one to modify if anybody has one to sell.Thanks in advance !
                   Don C.

Title: Re: Strut Tower Brace
Post by: wildgoody on August 01, 2010, 12:08:25 AM

I didn't know they came with a factory strut tower brace,
good to have if you wheel it hard, I got bent towers on mine

Wild

Title: Re: Strut Tower Brace
Post by: bentparts on August 01, 2010, 05:11:46 AM

Have you tried looking in a pick n pull or salvage yard? Much easier than making one.

Title: Re: Strut Tower Brace
Post by: Stagecarpenter on August 01, 2010, 10:21:32 AM

The local pull a-part doesn't have one,I plan to check other salvage yards this week.

Title: Re: Strut Tower Brace
Post by: Zukipilot on August 04, 2010, 05:34:09 AM

Call Hawk Strictly Suzuki.... 1-888-SAMURAI.. They should have it and usually ship out same day.

Zig

Title: Re: Strut Tower Brace
Post by: Stagecarpenter on August 04, 2010, 05:51:15 PM

Found one ! Thanks guy's for the replys.
     Don C.