ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: fordguy79 on August 26, 2010, 09:11:14 PM

Title: Pinion flange inter change
Post by: fordguy79 on August 26, 2010, 09:11:14 PM

Aside from the bolt pattern are the splines the same on a samurai  and trackick ???

Title: Re: Pinion flange inter change
Post by: wildgoody on August 26, 2010, 09:36:58 PM

Yes, both are 26 splines

Title: Re: Pinion flange inter change
Post by: Skyhiranger on August 27, 2010, 05:47:46 PM

Not necessarily.  They are the same spline count, but there are 2 different spline types that can be found on both samurais and trackicks.
See.....
http://bbs.zuwharrie.com/content/topic,55582.0.html (http://bbs.zuwharrie.com/content/topic,55582.0.html)

And the bolt patterns aren't necessarily different either.  The 88.5-95 samurais have the same bolt pattern as the trackicks.

Title: Re: Pinion flange inter change
Post by: wildgoody on August 27, 2010, 06:10:28 PM

Just when you think you got a right answer, well the new style is
more like a driveshaft spline, and I think it would be stronger than
the older style v splines

Wild

Title: Re: Pinion flange inter change
Post by: fordguy79 on August 27, 2010, 09:00:07 PM

good to know  I striped my flange being stupid 5grand drop on dry pavement and it was the weak link it had to be messed up by the P.O in the past