ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: S.Sidekick on August 29, 2010, 03:23:56 PM

Title: Quick question about extreme 4x4 rigs?
Post by: S.Sidekick on August 29, 2010, 03:23:56 PM

So i went up to Evans creek and saw lots of vehicle the are worth a pretty penny, and a majority of them are lower height wise in the rear compared to the front... Is there a reason for this??  My rig turned out the way on accident. should i leave it or fix it?

Title: Re: Quick question about extreme 4x4 rigs?
Post by: 96Kicker on August 29, 2010, 08:21:05 PM

I know most pre-runners are that way for desert racing but don't know about crawlers. I like the ride height of your rear, in my opinion the front looks way to high. Are those 33's on there? what size are you wanting to run and what type of wheeling do you do?

Title: Re: Quick question about extreme 4x4 rigs?
Post by: wildgoody on August 29, 2010, 09:16:36 PM

That's what happens when you put the same size spacers in the front and back

Title: Re: Quick question about extreme 4x4 rigs?
Post by: sir lance on August 29, 2010, 09:25:43 PM

he sas'd it.......

i would try and bring the front end down lower as well........

Title: Re: Quick question about extreme 4x4 rigs?
Post by: wildgoody on August 29, 2010, 09:27:23 PM

Ohh, then lift the back and fit some bigger tires  ;)

Title: Re: Quick question about extreme 4x4 rigs?
Post by: S.Sidekick on August 30, 2010, 02:24:39 AM

They are not the same size spacers. What happend was the front spring mount is mounted under the frame, but the rear is using the stock short arm mounts used previously for the factory lift on the side of the frame. I am hoping the front lowers some more when i redo my shackle angle, and yes those are 33's