ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: Hustler on September 05, 2010, 05:22:14 AM

Title: steel front end for trackick
Post by: Hustler on September 05, 2010, 05:22:14 AM

ive got a complete steel front out of a 2000 vitara waiting to be bolted into a trackick. not sure of the ratio at the moment but i have multiple ring and pinions as well as a lock right here to suit anyones needs. i will also seperate the banjo from the third if anyone is interested.

Title: Re: steel front end for trackick
Post by: djlantis57 on September 05, 2010, 03:58:11 PM

location location location
let's see if i can break my stock aluminum one first  :P

Title: Re: steel front end for trackick
Post by: Hustler on September 05, 2010, 05:37:59 PM

cleveland, ohio

Title: Re: steel front end for trackick
Post by: zuksofhazzard on September 07, 2010, 08:46:03 AM

Price on "Banjo" Housing and 3rd member please.

Maybe the locker too.

Shipped to Business Address: Sioux City, IA, 51103.

Thanks...

Title: Re: steel front end for trackick
Post by: Hustler on September 07, 2010, 03:03:17 PM

Quote from: zuksofhazzard on September 07, 2010, 08:46:03 AM

Price on "Banjo" Housing and 3rd member please.

Maybe the locker too.

Shipped to Business Address: Sioux City, IA, 51103.

Thanks...

im looking for 4.24 kick t-case gears, beadlocks, or 5 point harnesses. do you have any of these?

Title: Re: steel front end for trackick
Post by: zuksofhazzard on September 07, 2010, 05:28:21 PM

Sorry... I don't.

Title: Re: steel front end for trackick
Post by: ldodge92 on September 09, 2010, 07:28:05 AM

How much for everything?

Title: Re: steel front end for trackick
Post by: Jluck on September 09, 2010, 10:23:17 AM

lets see some prices.

Title: Re: steel front end for trackick
Post by: Hustler on September 09, 2010, 03:35:55 PM

sale is pending. wont know for sure till after the weekend. been so busy i can get it out of the car.

Title: Re: steel front end for trackick
Post by: Hustler on September 13, 2010, 02:29:32 PM

banjo housing is still available for $200 plus shipping. i will throw in the 26 spline shaft that goes in the housing and both inner CVs with shafts. no outer CVs

Title: Re: steel front end for trackick
Post by: nprecon on September 14, 2010, 07:31:56 PM

"both inner CVs with shafts"... help me out here, Hustler.  What are the "inner CV shafts"?  I think I'm tracking on the driver's side inner housing shaft, but I am confused on the other two.  Thanks.

norm

Title: Re: steel front end for trackick
Post by: Hustler on September 15, 2010, 02:46:21 AM

ok i knew this would be confusing.... the CVs come off the shafts. i have the shafts with the inner CVs on them, the CVs that are at the wheels are damaged so the shaft just has a spline on the other end, no joint. got it?

Title: Re: steel front end for trackick
Post by: Hustler on September 18, 2010, 03:21:08 AM

everything still available third included or seperate.