ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: cimotorsports on September 09, 2010, 04:05:32 PM
-
Parting out 2 1987 samurais Let me know what you need and we can work on a price. Email me at samuraiguys|removethispart||removethispart||removethispart||removethispart|@gmail.com or reply to this topic..
I accept Paypal, Money order, and Visa/Mastercard by phone aswell.
Call or text 724-541-3758 ( I stay up late) My name is Shawn
(http://i181.photobucket.com/albums/x137/cimotorsports/DSC00828.jpg)
(http://i181.photobucket.com/albums/x137/cimotorsports/DSC00829.jpg)
(http://i181.photobucket.com/albums/x137/cimotorsports/DSC00744.jpg)
-
Where are you located?
Thanks
-
Here is my wish list....
*Radio din (round vent dash)
*Electric wire panel cover (below the steering wheel)
*Passenger side cargo package tray
*Lower Targa panel badges
*New soft top
*Behind the front seat drain plugs (2)
-
Radio din (round vent dash) >>> Dont have anymore left
*Electric wire panel cover (below the steering wheel) >>> I have this
*Passenger side cargo package tray .. If this is the tray that sits above passenger legs I have this
*Lower Targa panel badges > are you talking about the small retangular plastic trim? If so i believe i have them
*New soft top I have a almost new white soft top with one small tear in the top, can be fixed CHEAP.
*Behind the front seat drain plugs (2) Should have a few of these i believe
-
I need a winshield frame just sent you an email thanks
-
how much for a full set of door handles?
-
whatcha lookin to get for the front axle complete with springs and steering? shipped to 13166 or dpending on where youare located i could come get it. I'm located in Central NY
-
PMs sent guys, let me know. Still have a bunch of parts left. Anyone need anything?
-
the radio box
-
fender flares if you still got em shipped to 81631
-
how mutch for the targa and shiped to 5741 du condor, terrebonne, qc, j7m0b7 thanks
-
how much for all for leaf packs shipped to 45102
-
I need an oil cap and a rear bumper sent to 00802
-
Radio Boxes all SOLD
Targa bars all SOLD
Leaf Springs all SOLD
Fender Flares All SOLD
Check your PMs guys. Sent a bunch out today. Let me know!
-
Anyone else need anything??
-
Pass an driver front fender with wheel wells. Shipped to 04240
-
ha good luck if shawn had a set ide get em i had a nice front clip and i sold it like a dumb ass now i need one.
-
are the doors still around?
-
I still have a pair of doors from the brown samurai. PM sent!
-
Sorry about my earler post (wish list). I didn't realze at that time I had to click to be notified of replies. I have picked up all of those items.
I do need the large plug on the engine side of the firewall directly behind the glove box that the wiring harness runs through. There is another plug on the drivers side that is the same diameter.
I would take either one as long as they seal the hole shut.
Just send me a Pm if you can help me out.
thanks, Tux...
-
Hi, how ya doin'? I'd really like to purchase several things. Especially the two bars that connect from the targa to the windshield, not the targa bars for the doors the two roll bar support things. I also need drive shaft bolts, t-case shifter boot and plate, exterrior door handles, interrior foor handles, door pannels. if you could cut out the passanger floor pan I'd buy that too, mine has a huge hole a foot and a half in diameter. If you have these parts I have the money right now and I'd really appreciate being able to get them. Im trying to get my samurai on the road by next week so I have a vehicle. If you could please call me at 502 669 2200, my name is Joel Hinton. I hope to hear from you soon.
Thanks,
Joel
-
Hi, how ya doin'? I'd really like to purchase several things. Especially the two bars that connect from the targa to the windshield, not the targa bars for the doors the two roll bar support things. I also need drive shaft bolts, t-case shifter boot and plate, exterrior door handles, interrior foor handles, door pannels. if you could cut out the passanger floor pan I'd buy that too, mine has a huge hole a foot and a half in diameter. If you have these parts I have the money right now and I'd really appreciate being able to get them. Im trying to get my samurai on the road by next week so I have a vehicle. If you could please call me at 502 669 2200, my name is Joel Hinton. I hope to hear from you soon.
Thanks,
Joel
PM sent..... Tux...
-
You know longer have the support bars that connect the targa to the windshield between the visors?
-
timing belt cover to 34117
-
Door handles inside and outside. Im tired of climbing through back when I forget to leave my window down....lol
-
hey i am looking for a 1.3L cylinder head if you happen to have one.
-
red lense on the drivers side tail light shipped to 36609
-
and glove box door with latch if you got one....
-
door kicker i have a complete set of tail lights non cracked in good shaoe pm me
and i have 2 of those plastic trays that go under the glove box 35 shipped for each one
Posted by: johnson90
Insert Quote
hey i am looking for a 1.3L cylinder head if you happen to have one. he has a new one i believe i will talk to him
Posted by: DoorKicker
Insert Quote
and glove box door with latch if you got one.... i think he has 2 left
-
My wish list:
Full exhaust from manifold to muff
Dash knobs
Seats all
Seat belt latch- female
Top top top
Plastic under steer column if you got it
Thanks zip-62812
-
I need the passenger side wiper assembly.
-
samuride1 , did you need the actual wiper arm the holds the wiper blade or the parts inside the windshiwld frame>? LMK
-
Would you take $15.00 for a gas tank filler hose protector shipped to 47240? Should be in the interior lower rear passenger side floor corner.
-
Let me check and see if I still have a filler cover, ill let you know asap
-
Let me check and see if I still have a filler cover, ill let you know asap
Thanks, I appreciate that. I located 1 on Ebay but am looking for the best deal. If you can let me know by early Monday that would work.
Tux...
-
Are you done with both the Samurai. I was in search of the the pistons. I want 2 pieces. Reply I you still have in stock..
-
Let me check and see if I still have a filler cover, ill let you know asap
Thanks, I appreciate that. I located 1 on Ebay but am looking for the best deal. If you can let me know by early Monday that would work.
Tux...
I went ahead and purchased the 1 one Ebay. I couldn't let it get away....
Tux...
-
i need the heater switch...shiped to 97467
-
Check your PMs guys! Anyone else looking for anything??
-
UPDATED LIST** Sorry for not posting this up the first time around guys!!
Windshield Glass $35.00
Wiper motor $15.00
Coolant Overflow Bottle $10.00
Brake Booster w/reservior $20.00
Multifunction switch (turn signal, wiper switch) $40.00
Rear Driveshaft (small flange) $50.00
Front Driveshaft (small flange) $50.00
Intermediate Shaft $20.00
OEM 1.3 Pistons and Rods $40.00
Complete Door Hinge Set $40.00
Stock Rear 3rd Member ( real nice shape) $65.00
Round vent dash Complete $40.00
Heater core/ blower box $25.00
Outer door handle set $20.00
Drivers Inner door handle $7.00
Dash Support Bar Tube $15.00
Doors $35.00 each left or right (come with glass, no handles)
Ignition switch, both door locks key (all matching locks) $50.00
Gaige clusters (non Tach) 20.00
Exhaust manifold $15.00
Intake Manifold (no carb) $20.00
Cylinder Head (stripped bare, was going to rebuild) $25.00
Rear Bumper $20.00
Shift Boot $5.00
T case Boot $5.00
Custom Turbo Manifold with Garrett T3,, comes with oil feed line, exhaust flange and BOV. $300.00 (bought off a guy on zuwharrie and it sat on my shelf ever since)
Dellorto 40mm Sidedraft Carbs w/ Hawk intake manifold and K&N filter setup $750.00 (Insane increase in power on my 1.6 8v!)
I offer very reasonable shipping rates thru Fedex. I know I have other parts , if you dont see what you need on the list just ask. I may have it.
-
Do you have a steering gear box & hardware.
-
Taz, check your PM
-
Anyone else need anything?
-
Do you have any interior door pull handles left? I need 2.
-
I have Pull handles, PM Sent. Still got boxes and boxes full of parts.
Pedal Assemblies $25.00
Complete Distributors , both for Carb and Fuel Injected Motors $50.00 each
Cylinder Head Bare $30.00
stock Pistons and Rods $25.00 Set
1.3 Crank $30.00
Oil Pans $20.00
Radiators $25.00
Clutch Fans $10.00
Motor Mounts
Exhaust Manifolds Both 1.3 and 1.6
Valve Covers
Timing Covers
Crank Pulleys
ETC ETC ETC
LET ME KNOW WHAT YOU GUYS NEED!
-
Weekend Bump! Help me help you!
-
Weekends almost here again! Anyone need anything?
-
UPDATED LIST**
Distributor (fuel injected) $65.00
Distributor (carburated) $40.00
1.6 FI intake manifold , throttle body and sensors $50.00
Radiator $35.00
Steering Box with pitman Arm $45.00
Valve Cover $10.00
Window Regulators, Either Side $25.00
Passenger Door Shell $30.00
Drivers Door Shell $30.00
Door glass , Either Side $20.00
Windshield Glass $35.00
Wiper motor $15.00
Coolant Overflow Bottle $10.00
Brake Booster w/reservior $20.00
Multifunction switch (turn singlan, wiper switch) $40.00
Intermediate Shaft $20.00
OEM 1.3 Pistons and Rods $40.00
Complete Door Hinge Set $40.00
Stock Rear 3rd Member ( real nice shape) $65.00
Heater core/ blower box $25.00
Doors $35.00 each left or right (come with glass, no handles)
Ignition switch, both door locks key (all matching locks) $50.00
Gaige clusters (non Tach) 20.00
Exhaust manifold $20.00
Cylinder Head (stripped bare, was going to rebuild) $25.00
Rear Bumper $20.00
Shift Boot $5.00
Dellorto 40mm Sidedraft Carbs w/ Hawk intake manifold and K&N filter setup $750.00 (Insane increase in power on my 1.6 8v!)
I offer very reasonable shipping rates thru Fedex. I know I have other parts , if you do see what you need on the list just ask. I may have it.
-
Tie rod that the drag link connects to. Shipped to 35546?
-
1.6L 8v starter? shipped to 97343~jluck
-
Looking for a set of front calipers and rotors for a disc swap on my Tracker rear. Got any?
-
Sorry, no starters, tie rods or brake hardware. Have bunch of engine stuff and body trim interior... etc
-
roll bar pads the 2 kicker peices that come off the roll bar targe bar pad
-
Do you got a good working radiator for 87 samurai? And the rear left trim piece that goes from the rear bumper to the wheel well and has a little side light in it? Shipped to 30467
-
How much for a rear long side axle?
Shipped to NYC 10463 area?
-
Got a good radiator and bumper trim piece, PM me if you still need them
-
ALL TO FIT 87 SAMMY:
Right rear side light (In Bumper End Cap)
Little knobs from heater controls
Complete Ash Tray w/ brackets
CAPT
-
PM Sent, anyone else looking for anything specific? I have alot of odds and ends left still
-
I have no doors on my sami. I need the both the driver and passenger doors with hinges, window glass and whatever else I need for a fully functioning door. How much would that cost me shipped to 92570?
-
I need any and all heater components. I'll shoot you a PM. Thanks
-
I need a 1.6l crankshaft
-
Did you sell the manifold and Garrett turbo already?
-
may have missed it but do you have the tubs? lookin for the floor board truck bed-like portion
-
do you have a hood by chance?
-
Looking for Softtop Bow or at least the plastic brackets that bolt to the body.
Thanks
-
I need the two front seat belt buckles. (part attaching to floor).
cposharky|removethispart|@stjoelive.com
-
Sorry guys, no tubs, no hoods, no body parts left other then rear tailgates , rear bumper and doors. PMs sent!
-
looking for the shaft that conects the steering shaft to the steering wheel
-
Pm sent , let me know
-
I will take both sun visors if you still have them!!!
-
Need a decent tailgate. How much shipped to 29108?