ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 1bigtracker on June 21, 2004, 04:19:22 AM
-
(http://i3.ebayimg.com/02/i/01/fc/9f/6e_1.JPG)
(http://i20.ebayimg.com/02/i/01/fc/e6/d0_1.JPG)
found on an Ebay kick don't know where he got them from. soem one e-mail him.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2482369177&category=6242
stu
-
Yeah i saw a kick here in ottawa with them i dunno were he got them from anyone else know?
-
Just sent him an ebay message. I'll let you know whan I hear back from him.
Zig
-
Awesome 96 GEO Tracker, 120 hp 16 valve motor???
What, a 1.6 16 v are only 97 hp...
Fredo
-
They look like the ones from Suzuki, the truck you saw in Ottawa was it a green van body, if it was that is my old truck, and they are the ones from Suzuki.
Mac
-
Posted by: Zukipilot Posted on: Today at 11:07:39
Just sent him an ebay message. I'll let you know whan I hear back from him.
Zig
Please post the dudes reply 'cause I want some of that flare action!
steveo
-
I second that, I really want a set of those flares, it's soo hard to find nice looking flares for those of us that don't have 34's lol
-
are you pickin on my skinny... tires? ;D
stu
-
;D
-
I think they are manufactured by EGR. I'm getting a set from my dad's work. For 175 bucks. Say they are for a 10 inch tire, who knows how big that is.
-
no reply yet. I'll check again in the morning :'(
-
They are EGR, made from ABS Plastic here in Australia. They were made as a Suzuki genuine accessory. They still make them for export I have posted about them before, they are not super wide but should be fine for 10.50 wide rubber as long as you are not running big backspacing.
-
I am running a 10.50 with 2.75 backspace, about half the tire sticks out. I guess its better than not having anything, at least the po po will see that I tried.
-
i held my sami fender flares next to my friends 89 tracker and they look really good, almost like those do, they follow the same curvature and everything...
not sure how to mount them though, theyre only plastic
Andrew
-
S
C
R
E
W
T
H
E
M
O
N
!
!
HEHE!! Sorry, it's late and I'm a smartass!
:D
-
Hey K. if that's you let me know. (Idaholwb) I finally registered with this thing (obviously) talk to you soon. _-D
-
Welcome nevada Dave, Yes that's Kendal (sp)
Welcome to the board (it's about time ;) )
Wild
-
I'm glad someone knew, he never emailed me back :-/
Zig
-
suzuki do these in 2 sizes
the ones in the picture are the smaller ones.
bear in mind that if fitted to a WELL USED OFF ROAD truck ...... they are very brittle....
they have holes that a self tapping screw goes into and holds the fender flare to the existing wing. there is also a small piece of rubber trim that goes between the truck and the plastic arch ...
they break very easily though
-
If anyone can find them for sale for less than 290 bucks please post where, damm expensive for a set of flares. Oh, if you can find them in canada that'd be cool too.
-
Yeah im in canada if any one wants to do a group buy let me know
-
Yeah im in canada if any one wants to do a group buy let me know
I am up for it if we can get a good price.
Mac
-
I had my dad price them at work, and they were 260 for the set. Largest size was 1 and 3/4 inch. Not worth it to me seeing as almost 4 inches of my tires stick out.
-
Welcome Dave!
Glad to see you finally got on here. Took you long enough!
;D ;D ;D
-
Hey K. if that's you let me know. (Idaholwb) I finally registered with this thing (obviously) talk to you soon. _-D
Glad you made it down to Nevada ok Dave.
~Nate