ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: S.Sidekick on September 26, 2010, 03:32:00 PM

Title: Sidekick Powersteering Question, Please Help!!
Post by: S.Sidekick on September 26, 2010, 03:32:00 PM

Hey, so on my SAS build i am using the stock sidekick power steering unit, and wanted to know how many teeth count the pitman arm is (if that is what is called). I have a trail-gear highsteer kit, and want to know if the pitman arm provided will fit the teeth count on the sidekicks./


Thanks for any help, Jon K.

Title: Re: Sidekick Powersteering Question, Please Help!!
Post by: sir lance on September 26, 2010, 06:34:17 PM

no, the toyota trail gear pitman arm will not fit sidekick sector shaft......but what you can do is get the stock pitman arm reamed out to fit the toyota tie rod end that comes with the tg kit......

or get an toy ifs steering box like everyone else LOL

Title: Re: Sidekick Powersteering Question, Please Help!!
Post by: joesteak on September 26, 2010, 07:27:13 PM

I used the stock steering box and made a custom drag link with a toyota TRE on one end and a suzuki TRE on the other.  But the turning radius sucks because the suzuki pitman arm is too small.  One of these days I'll buy the sky steering arms that are shorter.  I've been wheeling it like this for about 3 years now and it's not too bad.