ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: slow4x4 on October 14, 2010, 12:27:11 PM
-
hows it going everyone i have a 1991 tracker that a buddy of mine had sitting at his shop for 2yrs. The tracker i got for a awsome price and i have no use for it since i already have a 97 tracker figure someone one here could use it for parts or would maybe wanna trade me for parts, id be interested in lift parts and off road parts.
the good:
body (all panels)
low end of engine (200k) still ran great when i asked my buddy
all senors ect ect
wheels and tires pretty new id say 80% tread life
all lights
the head is brand new just the cam is shot (head has no lie 100miles on it)
the bad:
cam is shot (not getting oil to the head...it will run about 2 weeks then the cam will get worn no idea why)
working on getting title (has no lean and i will give VIN# so everyone knows its legit!
if anyone wants to trade some parts for this truck whole please let me know!
(http://i282.photobucket.com/albums/kk242/ivtecdoyou_2008/dam3.jpg)
(http://i282.photobucket.com/albums/kk242/ivtecdoyou_2008/dam.jpg)
(http://i282.photobucket.com/albums/kk242/ivtecdoyou_2008/dam1.jpg)
-
forgot to add 2wd 5spd, rear end aswell as tranny and cluthc are in working order
-
where are the parts located?
-
tomsriver nj,
-
someone please trade me a off road bumper and they can take the whole truck lol
-
does it have factory power steering. if so i would like to buy the crank pulley
-
ill have to check for you, ill get back as soon as i can give me a day
-
thanks, no worries got it figured out and got brackets on the way
-
how much for the whole thing?
-
$400obo
-
The head probably isn't getting oil because the head gasket was put on wrong. When it is put on wrong, it blocks the oil passage that goes to the top of the head. If that is the case, then the head is likely junk, because it damaged the cam journals and there is no fixing them, since there are no bearings or replaceable parts.
Even if it wasn't a head gasket problem, if the cam didn't get oil, then the head is likely junk, for the above mentioned reasons.
-
yea odds are, i just found out the cam rids right on the journal and has no bearing i figured it did, im thinking of other engines iv played with, kinda crappy