ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: JDMCRX on June 07, 2004, 02:12:53 PM
-
What fender flares u guys using post pics and were u got them from. For sidekicks
-
Fender flares? ??? :P
-
Fender flares? ??? :P
lol were lucky if explosivo has a bumper..or even fenders =) he might decide to rally the thing..then who knows what would be left
-
Why fender flares cause all the guys that run big tires on there zuks get fines. My frineds tires stick out 3/4" and the asshole cops fine him
-
That sucks...
Rural areas > * for offroading ;D
For everything else, they suck, though :(
-
I'm using the rear flares off a CJ on mine all around. They fit not bad and are pretty tough too
-
whats the average fine cost... US or cdn $
i took my sami flares off and cleaned it all up, and it looks damn sweet with the tires sticking out... ALMOST looks like i have toy axles (to the very untrained eye)
i have those utility trailer ones i talked about waiting to be fitted... but i might just leave it for now
Andrew
-
Yeah anyone sudjest a good company that has a set that are good not just some stick on ones that look like crap?
I saw trailtough but they look a bit big lol
-
That just means you're gonna have to go with bigger tires :D
-
JC Whiteny has some that a few people run. they seem to like them.
stu
-
If you are looking for something cheap, easy to repair,and will help keep Da Man off of your back heres what I use.This is on a Sammie but should adapt to just about any vehicle with some sort of a lip or flat surface around the fender,and they flex back into shape if you get to close to a tree,rock,cop car, etc (http://www.kielbassa.com/pictures/fender flairs013.jpg) This is with Toyota axles and 10"rims. MUTANT ZUK
-
I looked on JC font nothing.
Im looking for something thats fits the sidekick i saw a post on some company has that fit the sidekick.
-
whats the average fine cost... US or cdn $
A guy from PA just got busted outside Paragon this past weekend at GonZookin .........$105 US. Tires stuck out past the stock sammi flare MAX 1/4" !!!! Mine are like 3" past!!
-
A guy from PA just got busted outside Paragon this past weekend at GonZookin .........$105 US.  Tires stuck out past the stock sammi flare MAX 1/4" !!!!  Mine are like 3" past!!
An option to look into is getting the vehicle licenced as a specialty / collector vehicle. For example, in Oregon one can license their vehicle as this type and the mudflap / fender flare rules do not apply (a few people that I know are testing this theory now... So far, it has worked like a charm). The downside is that you get only 3000 miles of driving per year and you need to have a mileage log on you at all times... but if it's a trail only rig that kind of mileage may be acceptable. Anyway, it may be possible that your state has something similar.
http://www.odot.state.or.us/forms/dmv/6726.pdf
Something to look into.
HTH -Eric
-
That's good info to know about.......thanks.
-
JC Whitney flares
http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/I16191.gif;pv373f9a101d1621b6
                                       (http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/I16191.gif;pv373f9a101d1621b6 )
3"inch heavyDuty Flares
-
How does that trim stuff work??? Any pics of it on a sidekick?
-
Im running GM flairs. They are made for lots of models and you just trim to fit. They are available in a couple widths also plus they are super easy to put on.
-
Were did u get them from and some pics?
-
I got them from the GM dealer I guess I should have wrote down the part #. Click on my name and view my last ten or so posts somewhere in there are a few pics.
-
Here is a URL with lots of pictures of the JC Whitney 2" surface mounted flares.
http://www.whitepineclub.com/members/kd7hcg/miscpictures.html
Here is a pic;
(http://www.whitepineclub.com/members/kd7hcg/pictures/otherpics/DCP_4720.jpg)
-
Fuck those actualy look real good which ones are those part number#???
-
http://www.jcwhitney.com/webapp/wcs/stores/servlet/ProductDisplay?PID=1332256&productId=1256&catalogId=10101&langId=-1&AID=1157440&storeId=10101
(http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/I16188.gif)
2-1/4" Fender Extensions, Surface-mount Pair ZX141414W $39.95
-
Cool ill look at buying these mouldings
-
JC Whitney flares
[url]http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/I16191.gif;pv373f9a101d1621b6[/url]
                                       ([url]http://www.jcwhitney.com/wcsstore/jcwhitney/images/imagecache/I16191.gif;pv373f9a101d1621b6[/url] )
3"inch heavyDuty Flares
I just recieved mine from FedEx they're cheap at $54.00, When they arrived I did a trial fitting and they'll work with trimming the length and that's all. I'll post a photo of them when I get them installed tomorrow.
Edit: Photo of Box(http://www.kielbassa.com/pictures/DSCF0004.JPG)
-
Just make sure they're the right size before cutting. They sent me the 1 1/2 inch TWICE ???
I was shotting for the 3 inch size :-/
-
How does that trim stuff work??? Any pics of it on a sidekick?
JDMCRX - Here's photos of mine. ;D
(http://www.kielbassa.com/pictures/DSCF0008.JPG)
(http://www.kielbassa.com/pictures/DSCF0009.JPG)
(http://www.kielbassa.com/pictures/DSCF0010.JPG)
-
CZ: You got the 3-inch flare-lip mount version right?
-
Thanks man im going to oreder a set They look good and flexible.
-
whats involved with the install on these are they just screw on like the bushwackers? and did anyone order the 4" ?