ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: SamuraiParts on October 15, 2010, 03:52:32 PM
-
I used to be a member here when I had a couple trackers, but can't login with my old username (TonkaTracker) so I created a new one to see if anyone is interested in parts off this beast. 1988 Samurai with hard fiberglass top. This thing has been parked for about 8 years. I was told it ran fine when parked, driver went blind and stopped driving it. Lots of good parts, mostly stock. Let me know what you need. I'm located in Rochester, NY. If anybody wants to come take the whole thing for $500 be my guest. Good title.
Will get pics tomorrow. Let me know what you need.
-
pm sent
-
I need a rear drive shaft from mounting flange to the transfer case output to the flange that mounts to the differential, how much shipped to 91302?
Thank you,
Brett
-
Battery tray, preheater hose, clock (round vent dash). Shipped to 84015
-
I'll take a look at these tonight and get back to both of you.
-
Great, let me know...
-
Battery tray, preheater hose, clock (round vent dash). Shipped to 84015
Battery tray is shot. Clock, looks like this came without it. I'm guessing it would have been in the empty round spot between the two heater vents in the middle? Preheater hose... probably there and good, but not sure what exactly you need. Can you descibe what piece you need and where it's located?
Brett I will be pulling the driveshaft tomorrow. I'll let you know how it goes.
-
Also, I ripped this thing apart today... The following parts are off and ready to go...
Full Rollbar, complete with all padding and hardware. $150
Windshield, complete with full frame, wipers, wiper motor. $125
Full Fiberglass Hardtop. $375
Full Set of Fender Flares with Rocker Covers $150
Rear Bumper $50
Front Axle of value to anyone?
-
Feel free to make offers.
-
Someone told me that if you clean up your axle and as long as its not bent or welded on trail tough will give you $75 for the housing just slap a shipping label on it and ship it to them.
-
Do you have the two bars that connect the targa to the windeshield in between the visors? I also need a tcase shifter boot and plate I also need exterrior door handles, passenger floor pan. If you have any of these parts please call me at 502 669 2200.
Thanks,
Joel Hinton
-
I need full exhaust from manifold to tip,under dash plastic,seats all,that hard top if you still got it dwebb11b|removethispart|@gmail.com .62812
-
if your willing to part the motor i could use the complete cylinder head.
-
I need the passenger side wiper assembly.
-
whats your location
-
I dont know if he is on here anymore!
-
heater switch? shiped to 97467... side markers?
-
Looking for a 2 inch receiver hitch
-
hey i need the elbow that connects the distributor to the head. price shipped to 07716? let me know if you still have it. thanks
-
I need the hard top. Is it a full one peice covers cargo area? Or just the front part. Also need foor panels. Window cranks amd driver window glass. If it was a soft top id say soft top tension bar. Let.me know 23229 va. Also just one front passenger flare. And passenger front and rear caps to the ends of rocker plastic
-
^ Lol you silly goose, the original post was made almost 2 years ago. :laugh:
-
plz tell me u have the transfer case my number is 626 324 9096
-
Wow this is scary,like talkin to a ghost!!No-one here!! :o
-
I need the upper and lower headers, that connect the two fenders and hold the grill. also the right corner body panel with the hinge mount and mounts the windshield bracket. cut off between the hinges would be fine. Let me know. Thanks.