ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: TurboTerror on October 18, 2010, 12:54:37 PM

Title: Transfer case stuck in neutral
Post by: TurboTerror on October 18, 2010, 12:54:37 PM: So I was done wheeling and was about to get on blacktop so I unlocked the hubs and went to put it in 2wd when my transfer case got stuck in neutral ??? I read up on it and heard it could be the shifter sheet? Is this correct?
Title: Re: Transfer case stuck in neutral
Post by: ack on October 18, 2010, 01:26:31 PM: Most likely.

Do a search at Ack's FAQ for shifter sheet or transfer case for the details...

The link to Ack's FAQ is in my signature, below...
Title: Re: Transfer case stuck in neutral
Post by: slow4x4 on October 18, 2010, 01:36:37 PM: 85% that's the prob, had the same thing happen to me...if this is the case order the better poly kit from a off road company if you go back to oem over time this could happen again. odds are not for a very very long time but polyurethane is better either way! gluck
Title: Re: Transfer case stuck in neutral
Post by: lv2fsh on October 18, 2010, 09:31:22 PM: Get a brass one from ZOR. Last one you'll ever need.
Title: Re: Transfer case stuck in neutral
Post by: doughboy0379 on October 19, 2010, 12:24:11 AM: I have a question about the brass ones though how do you get them past the shifter pins?
Title: Re: Transfer case stuck in neutral
Post by: lv2fsh on October 19, 2010, 05:58:47 AM: They're notched if I remember but it dropped right in.
Title: Re: Transfer case stuck in neutral
Post by: djlantis57 on October 19, 2010, 10:38:55 AM: Twin sticks don't use shifter sheets ;) they're SO worth the upgrade
Title: Re: Transfer case stuck in neutral
Post by: doughboy0379 on October 19, 2010, 11:28:46 AM: Quote from: lv2fsh on October 19, 2010, 05:58:47 AM
They're notched if I remember but it dropped right in.

AH ok cool I bought a ploy one years ago so when these brass ones came out I was not sure how they were installed, Thank you for answering my question.
Title: Re: Transfer case stuck in neutral
Post by: TurboTerror on October 30, 2010, 10:04:58 AM: Thanks guys my sami is up and running now ! I went with the shifter sheet off of low ranges website.