ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: airmanwilliams on October 19, 2010, 04:49:06 PM
-
Ok so im going to go down to orem utah soon and find some diffs to pull from some sidekicks that I can swap into my 87 sami. I would like to know what years had what gearing though so I dont pull the wrong ones and end up having to pay for different sets since I pulled them.
-
I guess you didn't search on here, huh?
Even if using the chart that is posted on here, you still need to verify the ratio before you buy them. Count the teeth on the ring and pinion, divide the number of teeth on the ring by the number of teeth on the pinion.
-
nope im bad at remembering to do that first. ???
-
Ok so im going to go down to orem utah soon and find some diffs to pull from some sidekicks that I can swap into my 87 sami. I would like to know what years had what gearing though so I dont pull the wrong ones and end up having to pay for different sets since I pulled them.
89 2dr 1.3L carb 5speed man. 5.625
89-95 2dr 1,6L TBI 5speed man. 5.125
89-95 2dr 1,6L TBI 3speed auto. 4.625
91 4dr 1.6L TBI 3speed auto. 4.625
91 4dr 1.6L TBI 5speed man. 5.375
92-98 4dr 1.6L MPFI 5speed man. 5.125
92-98 4dr 1.6L MPFI 3speed auto. 4.30
92-98 4dr 1.6L MPFI 4speed auto. 5.125
94-98 2dr 1.6L MPFI 5speed man. 5.125
94-98 2dr 1.6L MPFI 3speed auto. 4.30
94-98 2dr 1.6L MPFI 4speed auto. 5.125
96-98 X90 1.6L MPFI auto or man. 4.625
4.625 gears have an 8/37 tooth count
4.30 gears have an 10/43 tooth count
5.125 gears have an 8/41 tooth count
5.375 gears have an 8/43 tooth count
5.625 gears have an 8/45 tooth count
-
nice! thank you brother I really appreciate this, what ive found in searches hasnt been that detailed.
-
nice! thank you brother I really appreciate this, what ive found in searches hasnt been that detailed.
Yes, someone made up a very nice list, didn't they? ;) :P
-
Can that list be made into a sticky?
Seems like this ground gets covered so much that we are developing ruts,
and you know what the Greenies do when they see ruts :P
Wild
-
Look for an 8V engine for me.
-
okie dokie man will do.
-
does anyone have a link to a write up for a swap of 4.62 gears into sami housings? I was going to pay someone to do this for me so I dont screw it up but now I need to look at doing it myself when I find cheap sami diffs.
-
jBrandon id just use your diffs you have,or id just bolt the Sidekick diffs in until you can afford to have Tyler do it for you. Doing it yourself can be a real pita and if not done correctly will just cost more down the road.
-
Chart in PDF:
http://www.zukiworld.com/forum/technical-discussion-beginner-repair/trackick-gear-ratio-chart/ (http://www.zukiworld.com/forum/technical-discussion-beginner-repair/trackick-gear-ratio-chart/)
-
thanks dan I plan on on sticking with my stock ones and gathering things until I can afford to either have someone do it for me or till I can pay tai alittle bit I think when I was at his place last he said that him and bryce could help me some.
-
Kool its good to hear your getting some good help
-
yup those two have been very helpfull especially tai in helping with all the little parts to make it street legal and his knowledge of things. Thank you too Dan for all the aswers to the many questions I call you about and youve given to me on the various sites.
-
ok so someone posted about what year sidekicks have what gears and what liter they are but can you guys also tell me what years have 8v or 16v engines please? The reason I ask is im calling some yards right now to get quotes on engines and other parts for swaps and they need the year to be able to see if the vehicle still has the engine or not.
-
2 doors
89...either 1.6 8V EFI or 1.3 8V carbed...the majority were 1.6 8V EFI.
90-93....1.6 8V.
94...1.6 8V, unless it was a CA or NY spec trackick, then it had a 1.6 16V.
95...1.6 8V if it is 2wd, 1.6 16V if it is 4wd.
96-98....1.6 16V.
4 doors
91....1.6 8V.
92-98....1.6 16V.
96-98 sidekick sport....1.8 16V.
-
thank you again skyhiranger for answering yet another question of mine.
-
thank you again skyhiranger for answering yet another question of mine.
No problem. ;) I don't think that info is on the site anywhere....so you wouldn't have been able to find it by searching.