ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: penguin on October 20, 2010, 11:11:58 AM

Title: trackick crank pulley
Post by: penguin on October 20, 2010, 11:11:58 AM

i am installing power steering on my 92 tracker. the donor parts are from 96 tracker.. the pulleys do not line up so i think i need a crank pully from a 92 tracker with factory power steering..  anybody got one let me know what you want for it

Title: Re: trackick crank pulley
Post by: Zukipilot on October 20, 2010, 12:40:44 PM

I ran into this... 98 PS on an 89.. and the problem was due to mounting brackets... give Hawk (1-888-SAMURAI) a call and tell them what you have, it may be a simple bracket replacement that fixes your problem.

Title: Re: trackick crank pulley
Post by: penguin on October 20, 2010, 02:26:11 PM

thanks zukipilot  just got off the phone with hawk and they were very helpful and had the bracket i needed at a great price...

Title: Re: trackick crank pulley
Post by: Zukipilot on October 21, 2010, 09:09:44 AM

No worries... glad to help... They have always helped me out with the odd issues I have ran into...

Zig

Title: Re: trackick crank pulley
Post by: Skyhiranger on October 21, 2010, 05:40:31 PM

Sounds like you got it figured out.  The 8V and 16V engines use different brackets for the PS pump....that is why it didn't line up.  All crank pulleys are the same.

Title: Re: trackick crank pulley
Post by: penguin on October 22, 2010, 08:19:50 AM

sure did  i got both ps and ac brackets from hawk... i had all the 16v parts to change it over alt,waterpump pully,timing belt pulley,etc but i didnt want to create a nightmare problem for someone else down the road so i keep it 8v setup like it shud be...