ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: slow4x4 on November 12, 2010, 11:18:23 AM
-
hows it going everyone, my 97 Geo tracker is leaking transmission fluid i replaced the torque converter plug and just did the oil pan gasket about 3 weeks ago, thought it was all good then it started leaking again little by little, i think its just the rear seal but i talked to a guy at trans connection and he said the transmission is shot because the input shaft is wobbling like crazy and its a internal problem yet the guy that fixed the truck said it was just the seal what to do what to do
-
the other question i forgot to include is if the transmission is shot can i do a 4 speed transmission and what would i have to do to make that work?
-
Get A second opinion before you do anything else. A 4 speed conversion is possible but you'd need the WHOLE wiring harness too, since the 4 speed is electronicly shifted and has it's own computer that ties in with the rest of the harness.
-
yea i read up on the 4 spd swap just after i posted, the trans was rebuilt around a year ago so thats why i was kinda up in the air when he said the shaft was bent messing up the seal ect ect
-
A bent output shaft?! I run the piss outa my auto and in 110k it hasn't bent an output shaft.
-
haha yea thats what im leaning towars to, i think its just the seal
-
I run the piss outta mine too. I have an 89 with over 300k miles. Mine has been all over hell and back, jumped multiple times, wrecked and put back together, driven in 3 feet of water, and probably any other form of vehicular abuse you can imagine. My trans is leaking at the output shaft too. It's not a bent shaft, just a bad seal.