ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: vw505 on November 18, 2010, 08:43:19 PM

Title: 95 frame with 92 body
Post by: vw505 on November 18, 2010, 08:43:19 PM

will a 92 tin top body fit on a 95 frame?

Title: Re: 95 frame with 92 body
Post by: wildgoody on November 18, 2010, 08:47:21 PM

There were some minor changes in the frames but I don't think
they cause any problems, the changes I'm thinking of are in the
front so look it over carefully before getting neck deep in this
project  ;)

Wild

Title: Re: 95 frame with 92 body
Post by: vw505 on November 18, 2010, 08:52:34 PM

OK good i found a tintop body for 200 doller and my 95 is cruched in the front, so was hoping to just do a body swap.

Title: Re: 95 frame with 92 body
Post by: z3ro on November 19, 2010, 10:44:54 PM

Why not just change the front clip?

Title: Re: 95 frame with 92 body
Post by: ZookPower on November 25, 2010, 08:52:14 AM

Is it a sidekick ? If so it doesn't have a front clip.