ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Model Specific Suzuki Forum => Suzuki XL-7 (Gen. 1 Platform) 2001-2006 => Topic started by: jagular7 on November 21, 2010, 04:30:59 PM
-
I had a CEL show up (P0128 IIRC) and told that the engine doesn't run up to engine temp. Followed the top hose off the radiator and the housing looked real small for a thermo. Pulled the cap anyways, and no thermo. It got too dark even with a light. Followed the lower hose off the radiator and it goes from rubber to steel tube to a connection with a housing that looks big enough for the thermo. Is the thermo located under this? Its located under the top hose connector.
-
its under the larger housing that goes to the lower rad hose, (the one that sits right beneath the upper rad hose housing.
-Lance
-
Thanks. That was my guess. I really don't want to loose too much antifreeze when I do this. It has 112k miles on it and all original cooling. I planned to flush this spring and want to use distilled water/coolant than my hard water from my house.
-
I've gotten the same code twice on snowy mornings up here where I live. Never hardened before. I'm not in the mood to change it this time of year and it's not that serious of problem.