ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: krittergitter on November 29, 2010, 08:48:41 PM
-
the car is a 96 sidekick 2 door soft top. top and seats are gone, hood is pretty good, right front fender is good, rear door is good, all other body parts are toast, all the rear plastic trim is good as well as most everything else on the car. I can ship or sell local, feel free to call 541 915 4748 I'm in eugene, Or. I have 91 and 95 parts too, as well as some sami stuff.
Bill
-
What type of Sammy parts you got for sale. Iam in Albany.
-
I'm in Portland, looking for a few parts for my '95 Kick
-Passenger-side front window regulator (manual)
-Driver's side interior door handle assembly (not the linkage, just the plastic part)
-Plastic trim piece on the top of the rear tailgate
-Center dash surround
-Passenger-side center vent
-
Elf: Mostly stock take off stuff, but I do have a lot of odds and ends, and I also have a Sami (steel) third with a lockrite and 5:12 s.
Thirty Nine: Regulator may be sold, I do have the door handle ass., I'm pretty sure the center dash trim is good, as well as the vent, the tail trim is being sold as a set with all the rear plastic trim.
Feel free to call me at 541 915 4748
Bill
-
do you have a front diff from the 96 tracker with 5.12 gears, if so how much shipped to 60013?
-
Thirty Nine: Regulator may be sold, I do have the door handle ass., I'm pretty sure the center dash trim is good, as well as the vent, the tail trim is being sold as a set with all the rear plastic trim.
Feel free to call me at 541 915 4748
Bill
Well it ends up that I'll likely need the whole plastic trim area anyways. I'll give you a holler assuming you still have the trip pieces.
- Andy
-
the gears are 4.30s i believe
-
Cost plus shipping on the transfer case to So Cal?
-
Still have the engine? Does it run good? And how many miles?
-
daddydave: $150. plus shipping, I have no clue as to the shipping fees, my zip is 97487
sionshards: yes on engine, runs excellant and very strong, 126K miles
-
I live in portland, how much would it be for the complete long block?
-
do you have a fuel door that is in decent shape
-
$ 500. for the long block
sorry fuel door is bent
-
dang, $250 more and I can get a jdm one with low miles
-
price on the third members? (only if they are 4.30's) I'm local BTW.thanks~jluck
-
do you have a fuel door that is in decent shape
Will one off an older one work for you ? If so I have an extra.. Make an offer plus the ride...
-
Ok, I would like the complete engine, cat, and starter. I won't have money till feburary for engine, but cat and starter I could buy next month, how much for those?
-
I'll be down tomorrow to pick up the parts we talked about.
Thanks!
- Andy
-
$250. for the pair of 4.30s no exchange needed Hawks Suzuki sells theirs for $400. each exchange Call me if you are interested. 541 915 4748
-
ok andy , i'll be looking forward to meeting you.
thanks , bill
-
Ok, ill call you next month when I get paid and feburary I will buy the engine and pick it up. Is it already pulled out?
-
I might have all the money next month to buy it all =)
-
No thanks on those 4.30's not in to paying "hawks" prices (he's ridiculously over priced BTW). And does that imply you are guaranteeing your parts with a warranty? ???
-
I didn't quote you the same as hawks, I quoted less than half of their price. I guarentee the parts are good, i ran them myself before i parted the car. NO, I will NOT guarentee any of my parts against abuse. The recyler gets my parts that are not good or is questionable, but if by chance a part slips though that is bad, I will replace it with a good one if I have it, if i don't have a good one at the time, I will gladly refund your money. either way you will also have the option of returning the bad part or keeping it (there might be good pieces within an assembly). I'm not out to cheat anyone, but I'm also not here to sell good parts for scrap iron prices. If I give you a price that you feel is too high, you are more than welcome to make an offer. the worst that can happen is i say no, no harm no foul. I have a very good reputation with honesty and I plan to keep it that way. I hope this helps everyone with any questions.
-
I didn't quote you the same as hawks, I quoted less than half of their price. I guarentee the parts are good, i ran them myself before i parted the car. NO, I will NOT guarentee any of my parts against abuse. The recyler gets my parts that are not good or is questionable, but if by chance a part slips though that is bad, I will replace it with a good one if I have it, if i don't have a good one at the time, I will gladly refund your money. either way you will also have the option of returning the bad part or keeping it (there might be good pieces within an assembly). I'm not out to cheat anyone, but I'm also not here to sell good parts for scrap iron prices. If I give you a price that you feel is too high, you are more than welcome to make an offer. the worst that can happen is i say no, no harm no foul. I have a very good reputation with honesty and I plan to keep it that way. I hope this helps everyone with any questions.
sorry about that...I missed the "for the pair" part I just saw the price and threw up a little in my mouth. anyway allot of people do the same thing too....look for a deal on craigslist or other places go and buy a whole rig for 200 bucks and start parting and selling. (that's how I financed most of my projects growing up) but I would just get the parts I needed and recoup the money on the rig and a little more but good god man some of your prices are high. I also have and sell sidekick stuff and the last complete thirds went for 75 bucks each. heck I got a complete front and rear 4.62 set from liberty overland for way less than your asking price. I will stop muddying up your post and let you back to fetching a kings ransom. ::)
-
The 4.30s are a bit hard to come by , so the price is a bit more than normal, but like I said, if a price is too high, just shoot an offer, I am not always current on the going rate.
-
So on the engine, when was the last time timing belt and water pump were done? And obvious leaks on it? Just wanna know what to get whiles its out before I shove it in mine =) thanks
-
standard procedure: do it all while it's out, disty seals, cam and crank seals, valve cover, water pump, timing belt, water hoses, oil cahange, you get the idea, do all the maintenance stuff so you know what you have, none of these were problems for me, but if it's out, then that's the easiest time to do it
-
Ok, that's basically what I was planning, better safe than regretting it, lol
-
exactly, ----------------------------------------------------that's my way of thinking too.
-
Just got another car so I'm selling my sidekick, so no on engine and cat, sorry :/
-
no worries
-
still got those control arms? ran into some money problems sorry i didnt call back. friday is payday so friday night ill have $
-
Yes Feel free to call me 541 915 4748 Bill
-
You wouldn't happen to have 16X7" wheels on that 96 Sidekick? I'm looking for a set.
-
hey bill its thomas in reedsport.. got a pic of the motor?
-
got exhaust cat back?
-
Sorry wheels and tires are sold
Hey Thomas- no pics yet,
Sold cat to recycler, the rest of exhaust was total trash
-
Exterior color? Being lazy looking for the plastic piece that goes around the door handle and lock cylinder on the passenger side.
-
That a G16A or B engine? 1.6L 16 Valve, right?
Any smoke? Any tapping or knocking?
-
HCGALVIN- no smoke, knocks, or taps at all, this is an excellant engine, I actually used this car on my elk hunt this past fall, it performed flawlessly. Feel free to call me-541 915 4748
-
s
-
AWESOME PICTURES. Looks like a coastal bull? Must have been a chore getting it loaded in one piece.
Thanks for checking. Mine is Barbie Jeep green. Kidding, it is a darker metalic green. I included a picture of what I am after, but I need the PASSENGER side. Thanks Sean
-
sorry, all i hav is black ones and marroon ones, yes it's a coastal bull, he was a coulpe hundred yards down in a steep canyon, i strung line to him and pulled him out with the sidekick, he was easy to load using a come a long wrapped around his mid section. as you can see, we couldn't get him all the way in. it was definitely a sight to see.
-
Thanks for checking. Yes the picture is a site to see, thats why it is my new screen saver at work.
-
maybe I'll do the same
-
Here's my sami " THE KRITTERGITTER "
-
Nice toys really like sam's paint job! Maybe after my 3 teen daughters are out of the house I'll have a bit of extra $ to get a second project. Not that I need it, there is always something that "needs" to get done with with tracker.
-
thanks , paint is courtesy of krylon lol
-
Bump
-
Kritter- I need the brackets for the rear console mount (2) with the cup holders and cubby, do you have those? Sean 541-5321-6409?
-
sorry , sold it
-
still got the 16v motor? ever get up to Portland?
-
sorry for the delay, yes I still hav a 1.6 16V motor please call 541 915 4748 Bill
-
$$
-
any rear drivelines?..2door
-
yes a couple of them call 541 915 4748
-
yes a couple of drive lines sorry
-
you have a brake line (non-abs) from master to inner fender on drivers side?
-
looking for manual window regulator driver side
looking for rubber shift boots for tranny and transfer case
looking for suzuki front grill emblem
all need to fit a 90 tracker
-
bump
-
Do you have a good horn button from a sidekick?
-
i think so i ll hav to see 2 moro
-
Sweet, thanks for looking, I'm local so if the deal is right I might be able to pick it up soon.
-
Is it tomorrow yet?? ???
-
it will be tomorrow, tomorrow......or will it ???
-
sorry I didn't get off work until really late today, how bout 2 moro
-
I got a set of good horns for the Samurai. Guess what for free. I just approached an owner whose car got crashed in an accident and he agreed to give me his set of horns..
-
sorry drew , prongs are broke on mine too
-
I need a non abs proportional valve with brake lines for the front driver side. you got?
-
Thanks for looking Kritter!!
-
jluck i pm ed u couple weeks ago to give you one free, i never heard back
-
yea I thought I had it figured out but realized I need the proportional valve too. Im changing from a 4 door booster to a two door one so I dont know how they are plumbed from the factory. (how the front and rear brakes split through the valve)
-
Drew there is a horn button on ebay that ends today
-
Thanks for the heads up, I looked and looked but couldn't find it, musta ended the auction before I could get to it... Thanks again!!
-
wow that was fast, some one may hav got it on the buy it now price
-
these parts need to go !
-
Do you have any of the injection parts? Looking for ECM, Harness, MAF and assortorted bits.
Matt
-
pm sent
-
bump
-
Do you have the tailight cluster wires, drivers side?
-
sorry they've been sold
-
bump
-
pm me a price on the steering shaft that goes from the steering box to the steering wheel on a non ps tracker
-
lol I just pm 'ed you from a difference place. I'll pm u a price
Bill
-
im looking for soft top bars and hardware for my 98 shipped to 07066
-
how does $100. shipped sound
-
do you have manual lockout hubs?
-
auto hubs sorry
-
looking for drivers window regulator and auto tranny dipstick, didn't read what kinda trans you had. Thanks, Jack
-
sorry but auto tranny and regulator already sold
thanks
-
I just got another 96 with a near perfect body, motor is toast, its 2 wheel drive
-
??
-
Kritter- what are you doing at home? It's OCTOBER, shouldn't you be out killin somewhere. I'm out starting tomorrow, will check to see what you have left when I get back. What color is the 96? Things I think I will be interested in is the top, the drivers door regulator, the tailgate interior cover, radio if it is the kind my daughter can plug her I-pod into, etc...
-
well i shot a 3 pt opening morning, going again tomorrow just to go along. 1 is red, one is purple, i do have the regulator and inner rear door panel, not sure what radio is in it phone call gotta go
-
Bill,I need a dimmer switch for the audikick (rheostat).
maybe a couple of them....
-
r u talkn bout the dash light dimmers if so , i have sum how does $15. sound shipping included. for two that is. also i need to know what style older like a sami or newer as inclosed in the plastic mount that snaps into the dash
-
-
-
just got 94 tracker and someone has put samy front calipers on it.cant get a full turn,the caliper rubs the front springs when turned hard.so im in need of front calipers with mounting brackets fro a 94 .do you have any?? shipped to 45784
-
pm sent
-
r u talkn bout the dash light dimmers if so , i have sum how does $15. sound shipping included. for two that is. also i need to know what style older like a sami or newer as inclosed in the plastic mount that snaps into the dash
I picked up a couple at the wrecking yard.thanks though.
-
no problem
-
:sleepy: ???
-
Still at camp. Got a buddy up here with a 95 that is kicking around a new motor. Any of your have a 16v runner in them? Will be out of the hills at the end of the season.
-
no motors at this time
-
home now, anything that I previously listed still available?
-
yes, rear door panel and drivers side regulator, colors are ;1996 metallic purple complete body in 95% condition 2 dr soft top
1996 red rear tailgate door and hood 1991dark gray metallic rear tailgat door and upper fender tie, the piece that goes between the fenders and its also between the hood and grill. how'd ya do huntin
-
I'm looking for a sidekick pitman arm and the little plastic panel that goes under the steering column for a tilt steering model. Do you have either of these?
-
How much do you want for the drivers side window regulator and the rear door panel, to Medford 97504?
-
sorry drew no pitman arm left and nothing for tilt
-
Thanks for looking!
-
no problem
-
If you have a driver side interior door handle, preferrably gray, I would love to have it. PM me. Located in Las Vegas, NV
-
lookin for a driver side seat 98 kick...???
-
i'll check on handle and seats have been sold
-
im back in town now
-
Got any soft top front clips? How much to a noob in Norrth Carolina?
-
$20. for 2 shipping included
-
Window channel rubber?
-
yes on window channels 1 for 25 or 2 for 40 shipping included
-
:sleepy:
-
hello, need manual shifter with small boot and clip that seals it to the tranny. I need it for a 96 tracker 2 w.d.. thanks... ship to 86406.
-
Hey patches, that stuff went with the tranny, Sorry
-
I need (1) body mount.
I need the part that sits on the frame.
I don't think it matters, but its for the Grille Support/Front Body Mount.
Thanks...
-
i just sold the stripped out rolling chassis today. so no body mounts . sorry
-
i just sold the stripped out rolling chassis today. so no body mounts . sorry
No Problem.
Thanks anyway...
-
u bet
-
:sleepy:
-
:P
-
Do you still have the jack and jack handle? How much to ship to 78239?
-
pm sent
-
rear diff with 4.30 gears pm me thanks
-
pm sent
-
:-\
-
Have a working cluster? I need a good speedo that doesn't make noise when I drive when it 's cold. :)
-
pm sent
-
your cluster is ready to ship, thanks again
-
Sounds good, thanks!
-
Cluster shipped out today, thank you
-
Did you sell the window rubber? If not I'll take.
-
I need a lot more info exactly what are u lookn for and for what vehicle
-
I need a lot more info exactly what are u lookn for and for what vehicle
Looking for 2x outside window channel seal for 96 geo tracker 2 door 4x4. Thanks
-
yes on window channels, PM sent
-
:o
-
-
sorry but they hav been sold
-
What sami parts do you gave left? Stock wheels? And how about a PM with prices on that third if you still have it. Please and thank you. In NC 28762
-
stock wheels would cost u more than value on the shipping alone, which 3 rds were u lookn 4
-
How much would you say the stock wheels weigh?
-
Do you have:
1- the complete steering wheel with the airbag assy?
2- glove box latch/lock
if yes let me know your price shipped to Miami FL 33166 business address
-
yes I have the parts you r lookn for
-
:sleepy:
-
93 SIDEKICK ,I AM LOOKING FOR THE PIECE THAT COVERS THE HEATER CONTROLS ON THE DASH AND THE RADIO FITS IN TO . ???
-
sorry but i sold them both
-
any center console drink holder set ups?
-
no but i seen a couple on ebay
-
ben havn internet probs, i think its all fixd now, sorry for any inconviences
-
:)
-
:o
-
Do you have a clutch pedal for a 96-98? threaded not splined one. I just need the pedal not the whole assembly. Thanks again, Chris
-
manual locking hubs? How much if you have them? c: 970.250.1320
-
dang, $250 more and I can get a jdm one with low miles
Wow for 250 more you can get a JDM engine??? Through who? Everybody I called didn't have any, I finally bought a POS Got Engines.com. 1100 shipped to friends business what a roach looked like it had been sitting outside for a year. Head Gasket blew but has used a little water since I put it in.
-
:sleepy:
-
Do you have a rear license plate holder/with light (mounts on the rear door/hatch)?
-
do you have the combanation cluster? ie the turn signals/washer switches. also do you have a t-case from 92 and newer?
-
???