ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: camokick93 on November 30, 2010, 05:34:04 PM

Title: Modified my rear diff skid plate.
Post by: camokick93 on November 30, 2010, 05:34:04 PM

I used 3/8 in plate 2 pieces of 1/4 in for the sides.

Title: Re: Modified my rear diff skid plate.
Post by: camokick93 on November 30, 2010, 05:38:14 PM

Here are 3 more pics.

Title: Re: Modified my rear diff skid plate.
Post by: Trackasaurouswrex on November 30, 2010, 06:34:10 PM

 Looks like a good improvement, but can I offer a suggestion? You might want to add a pinion support for the new section, due to the increased length.

Title: Re: Modified my rear diff skid plate.
Post by: bentparts on December 02, 2010, 04:47:51 AM

I can see a small problem with that design, if you do hit it hard enough it's going to bend right up into the driveshaft and stay there until you can either bend it back or remove it.