ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: sammi88 on December 12, 2010, 08:24:58 PM

Title: 96 sidekick sport.
Post by: sammi88 on December 12, 2010, 08:24:58 PM

Im doin my solid axle toyota swap under my 96 sidekick sport was wondering what i have to do to bolt up the drive shafts and should i use toyota or the sidekick shafts or does it matter.

Title: Re: 96 sidekick sport.
Post by: Zukipilot on December 13, 2010, 04:22:20 AM

I believe it is Trail Tough (or Trail Gear) that makes a multi flange that allows you to bolt a Toyota, Sami or Kick drive shaft to the diff. They are pre drilled to accept all three patterns. Look for them under samurai drive line parts...

Zig

Title: Re: 96 sidekick sport.
Post by: sammi88 on December 13, 2010, 04:26:21 AM

i thought i saw them there but couldnt remember and when i looked i couldnt find them thanks i appreceiate it ...

Title: Re: 96 sidekick sport.
Post by: Zukipilot on December 13, 2010, 06:13:35 AM

I think this is what you need....

http://www.trail-gear.com/triple-drilled-flange (http://www.trail-gear.com/triple-drilled-flange)

Title: Re: 96 sidekick sport.
Post by: sammi88 on December 13, 2010, 06:16:40 AM

awesome thanks man ..

Title: Re: 96 sidekick sport.
Post by: sammi88 on December 13, 2010, 11:06:39 AM

anyone who has put toyota axles under a kick hav any suggestions on leaf spings for the front? i have a brand new set of rear jeep xj 1.5 in springs but dont kno if the would b to much lift, any help would b great..