ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: adamsobi on December 17, 2010, 08:44:26 AM

Title: Control arm bushings
Post by: adamsobi on December 17, 2010, 08:44:26 AM

are the control arm bushing replaceable?

Title: Re: Control arm bushings
Post by: wildgoody on December 17, 2010, 09:39:37 AM

I don't think there are replacements available, but you may find some
other vehicle that you could use replacement urethane bushings and
replace them with, you may have to modify them, or see if someone
here works with urethane and can make some.

Wild

Title: Re: Control arm bushings
Post by: Rhinoman on December 17, 2010, 10:12:49 AM

try bits4vits, I think Dave Jones had some made.

Title: Re: Control arm bushings
Post by: bentparts on December 17, 2010, 12:08:50 PM

I found them listed at Auto Zone, not cheap though a set of 2, front and rear almost $100 ! Yikes! I bet if you did an ebay serch or a web serch you'd be able to find them. Also, the guy that does my alignments can get them from his suspension supplier.

Title: Re: Control arm bushings
Post by: adamsobi on December 17, 2010, 01:07:42 PM

cool, i got a good deal on some control arms, 25$ for the pair, but the bushings are fairly shot. im gonna cut them up a little and do a widening mod.

Title: Re: Control arm bushings
Post by: utahskibum on December 17, 2010, 08:06:33 PM

Low Range off road was able to order me some- I think they were 60, but don't quote me on that.

Title: Re: Control arm bushings
Post by: airdale navy on December 19, 2010, 05:31:11 PM

www.rockauto.com (http://www.rockauto.com) shows them.

Title: Re: Control arm bushings
Post by: adamsobi on December 19, 2010, 08:22:59 PM

Rock auto it is. thanks airdale navy

Title: Re: Control arm bushings
Post by: airdale navy on December 20, 2010, 05:13:05 PM

You are welcome.I use them alot.