ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Model Specific Suzuki Forum => Suzuki Samurai (All SJ Platform) 1981-1998 => Topic started by: Wildtire on December 18, 2010, 08:07:46 PM

Title: Engine and Tranny Swap
Post by: Wildtire on December 18, 2010, 08:07:46 PM

Are there any Transmissions that have the same spline on the tailshaft? Thinking about what to do for an engine swap and maybe tranny and T case if needed. Not even remotely interested in a 1.6 or a TDI.

Title: Re: Engine and Tranny Swap
Post by: tipover on December 19, 2010, 08:34:29 PM

The only thing that I know is that the kick and sammy transmissions have 23 spline out outs.  I don't know if anything else has the same spline.

hopw that helps.

Title: Re: Engine and Tranny Swap
Post by: Drone637 on December 19, 2010, 08:54:01 PM

The kick 2wd transmission have the same output shaft.  But you can just make a custom jack shaft with just about any 2wd transmission and run it to the engine.  Any drive-line shop should be able to put it together.

Title: Re: Engine and Tranny Swap
Post by: Wildtire on December 30, 2010, 05:13:01 PM

Word... Thanks!

Title: Re: Engine and Tranny Swap
Post by: Drone637 on December 31, 2010, 11:35:50 AM

Do an rotary swap!  Those look like fun.  :)

Title: Re: Engine and Tranny Swap
Post by: Wildtire on January 24, 2011, 08:02:42 PM

New Colorado Emissions aren't being nice to any engine swappers, so it's gonna be an 8 valve 1.6 with a GM throttle body and ecm, with a stock airbox. They won't even know what just rolled past em!

Title: Re: Engine and Tranny Swap
Post by: jrbblack93 on February 01, 2011, 08:40:38 AM

you can do the swap with the chevy V6 vortech engine from rocky road outfitters.
you can look  it up at http://www.rocky-road.com/vortec.html (http://www.rocky-road.com/vortec.html) its pretty expensive but if you have the money and the time to do it and the tools it will pretty beast.   8)